66 Inch Pro Series Denali Snow Plow with Standard UTV Push Tube

Blade:

• U.S.A. made
• County-style blade with curved design made of 12 gauge steel
• Sand blasted, powder coated with epoxy primer and TGIC polyester top coat for corrosion protection, UV resistance and durability
• Angle blade is 23 inches on the tallest side and 16 inches on the shortest side
• Rubber flap stabilizer bar with upgraded (stiffer) rubber flap
• High strength, high yield 3/16 inch thick grade 50 steel wear bar
• Includes edge stiffeners and stabilizer bar
• Plow markers included
• Height and angle adjustable premium steel skid feet
• Impact resistant reinforcement system disperses force of impact to the sturdiest part of the UTV, preventing damage from sudden impact
• Includes 3 year warranty on the plow blade against manufacturer defects

Push Tube:

• Impact resistant reinforced pivot assembly
• Two additional support bars for maximum durability and strength
• Turn system allows for easy blade positioning in different angles to the left or right - 0 degrees. 12.5 degrees and 25 degrees
• Simple detachment systems with the pull of a pin
• Structural tube steel cross bar for added lateral rigidity
• Quick release pins included
• 13.5 inches center to center for plow mount tabs

Optional Hydroturn:

• Parker hydraulics system with built in relief valve overload protection
• Hydraulic system is completely sealed for life
• Full radius turn in just 5 seconds while driving
• Heavy duty chrome plated 3/4 inch cylinder shafts
• Two bolt installation of hydraulic cylinder and pump
• No modifications necessary
• Wire harness utilizes weatherproof connectors
• Backwards compatible with manual turning system
• Overload protection of 4,000 lbs. of extension force and 3,500 lbs. of retraction force
• Includes 3 year warranty

Optional Plow Pulley Fairlead Kit:
The Plow Pulley Fairlead Kit is designed specifically to resist wear from the steep angle that occurs between the fairlead and the plow, extending the life of your winch cable. It can be used with either a steel or synthetic cable and is constructed of black powder coated 7 gauge steel. There are two roller heights for different fairlead heights and angles and you'll receive hardware and instructions.

• Standard spool pattern: 3" x 4-7/8"
• Wide spool pattern: 3" x 6.67"

Optional Additional Wearbar:
If you want to keep the edges of your snow plow in top shape the Denali Polyurethane Wearbar is the choice for you. Not only is the wearbar reversible for longer use, but the polyurethane construction outlasts rubber and steel. The wearbar won't cause damage to brick, concrete, curbs and more! The wearbar is the perfect choice to increase productivity and reduce equipment wear.


Optional Pushtube Lift Kits:
When your UTV has those monster tires or that beastly lift kit on it, using a snow plow in the winter can be a pain. Finding a solution that solves the problem of your pushtube matching the height of your machine can mean complete removal of your tires or lift. With the Denali Pushtube Lift Kit installed, you can keep your tires and lift kit on, while giving Jack Frost the boot! This Pushtube Lift Kit bolts directly to your existing Denali UTV Pushtube giving an easy install, the 2 inch lift will give you 13-15 inches off the ground, and the 4 inch will give you 15-17, all while meeting your snow plow needs!