- CANNOT SHIP TO ALASKA OR HAWAII.
- Must have a winch to use plow system.
- The 2016-17 Wolverine R-Spec SE models will require drilling out of two holes.
Applicability: 2016-18 Yamaha Wolverine and Wolverine R-Spec
When old man winter hits are you prepared to tackle removing the cold snow? How about letting your Yamaha Wolverine do the work for you? If you have a large area to plow you are going to want the Denali 66 Inch Pro Series Snow Plow. This plow system is great if you have a long driveway or are pushing the snow a great distance.
The Denali 66 Inch Pro Series Snow Plow is a center mounted plow so that it disperses the force of an impact to the sturdiest part of your Wolverine 700. The blade has a curved design to cut the wet snow and throw it out of your path and is angled 16" on the low side and 23" on the high side. The push tubes have an impact resistant reinforced pivot assembly and can be simply detached with the pull of the pin. This system also comes with plow markers so you can be sure of where the edge of the blade is to obstacles you are plowing around in deep snow. You will need a winch to operate the plow system, if you do not have one already check out the vast variety we offer before you check out.
County-style blade with curved design made of 12 gauge steel
Impact resistant reinforcement system disperses force of impact to the sturdiest part of the UTV, preventing damage from sudden impact
Includes edge stiffeners and stabilizer bar
Sand blasted, powder coated with epoxy primer and TGIC polyester top coat for corrosion protection, UV resistance and durability
Available in black, red or yellow
High strength, high yield 3/16 inch thick grade 50 steel wear bar
Angle blade is 23 inches on the tallest side and 16 inches on the shortest side
Rubber flap stabilizer bar with upgraded (stiffer) rubber flap
Plow markers included
Height and angle adjustable premium steel skid feet
Includes 3 year warranty on the plow blade against manufacturer defects
Push Tube Specifications:
Impact resistant reinforced pivot assembly
Turn system allows for easy blade positioning in different angles to the left or right - 0 degrees. 12.5 degrees and 25 degrees
Simple detachment systems with the pull of a pin
Structural tube steel cross bar for added lateral rigidity
Plow Mount Specifications:
100% laser cut 1/4 inch steel
Slotted holes allow blade to hug the ground
Optional Hydroturn Specifications:
Parker hydraulics system with built in relief valve overload protection
Hydraulic system is completely sealed for life
Full radius turn in just 5 seconds while driving
Heavy duty chrome plated 3/4 inch cylinder shafts
Two bolt installation of hydraulic cylinder and pump
No modifications necessary
Wire harness utilizes weatherproof connectors
Backwards compatible with manual turning system
Overload protection of 4,000 lbs. of extension force and 3,500 lbs. of retraction force
Includes 3 year warranty
Optional Push Tube Length:
Choose the push tube length that you need to fit your needs. If you have tracks, then choose the extended push tube to get the snow plow further out, giving you more room for the tracks to work without interference.
Optional Plow Pulley Fairlead Kit:
The Plow Pulley Fairlead Kit is designed specifically to resist wear from the steep angle that occurs between the fairlead and the plow, extending the life of your winch cable. It can be used with either a steel or synthetic cable and is constructed of black powder coated 7 gauge steel. There are two roller heights for different fairlead heights and angles and you'll receive hardware and instructions.
Standard spool pattern: 3" x 4-7/8"
Wide spool pattern: 3" x 6.67"
Optional Additional Wearbar:
If you want to keep the edges of your snow plow in top shape the Denali Polyurethane Wearbar is the choice for you. Not only is the wearbar reversible for longer use, but the polyurethane construction outlasts rubber and steel. The wearbar won't cause damage to brick, concrete, curbs and more! The wearbar is the perfect choice to increase productivity and reduce equipment wear.
Optional Pushtube Lift Kits:
When your UTV has those monster tires or that beastly lift kit on it, using a snow plow in the winter can be a pain. Finding a solution that solves the problem of your pushtube matching the height of your machine can mean complete removal of your tires or lift. With the Denali Pushtube Lift Kit installed, you can keep your tires and lift kit on, while giving Jack Frost the boot! This Pushtube Lift Kit bolts directly to your existing Denali UTV Pushtube giving an easy install, the 2 inch lift will give you 13-15 inches off the ground, and the 4 inch will give you 15-17, all while meeting your snow plow needs!
Snow plow , December 26, 2018
Posted By: James - verified customer 1 people found this review helpful
Purchased the 66” Denali in yellow for a Yamaha Wolverine. It shipped fast and arrived in great shape. The kit is easy to install and the directions explain everything , it can be installed by yourself in about an hour. I did purchase the additional plow roller kit it is nice and takes the stress off the winch rope. But I think it is a little overpriced for what it is. Overall I am happy with the kit and have used it pushing wet snow that was about 10”-12” deep with no problem. The length of the road is about 2,000 ft. and I had it cleared in under an hour.