- CANNOT SHIP TO ALASKA OR HAWAII.
- Must have a winch to use plow system.
- On 2012-13 Coleman 800 models, two (2) holes are required to be drilled and tapped. This will NOT void the manufacturer's warranty on the UTV or plow.
With the winter months just around the corner, your Coleman 500, 700, or 800 and you are preparing for the worst. Whether you spend countless hours on the farm or are trying to head to work outside of home, things like snow and ice are going to cause a major hassle without the proper tools. Shovels and snow blowers require hours of moving, wearing you out before you even get started. The Denali 66 Inch Standard Series Plow System is exactly what you are in search of to hook up to your UTV.
Some of the features of this plow system include a 19” scoop constructed of sturdy 11-gauge steel. The scoop sits at a 65-degree angle with center mounting to ensure rolled up and evenly dispersed forward snow with ease. Paired with the scoop is an impact resistant standard size push tube that allows you to position the plow at 0, 12.5, and 25 degrees. Detachment is easy with a simply pull of a pin along with steel tubing cross bar for durable flexibility. Laser cut for superb fitment, a plow mount is included with this kit and manufactured with slotted holes to allow the blade to hug the ground without catching and busting anything. From optional hydroturn and extended push tube length to optional plow markers and a plow roller, these are just a few of the many reasons listed below why the Denali 66 Inch Standard Series Plow System is the perfect match for even the hardest snow storm!
11 gauge steel leading horizontal supports
Four 7 gauge ribs run the full length of the blade
Three additional 7 gauge horizontal stabilizers support the deepest point of the blade
65 degree attack angle and over center design ensures snow rolls up and is thrown forward
Replaceable 7 gauge, grade 50 steel wear bar
Height and angle adjustable skid feet included
Center mounted plow disperses force of impact to the sturdiest part of the UTV, preventing damage from sudden impact
3 year warranty
Push Tube Specifications:
Impact resistant reinforced pivot assembly
Turn system allows for easy blade positioning in different angles to the left or right - 0 degrees, 12.5 degrees and 25 degrees
Simple detachment systems with the pull of a pin
Structural tube steel cross bar for added lateral rigidity
Plow Mount Specifications:
100% laser cut 1/4 inch steel
Slotted holes allow blade to hug the ground
Optional Rubber Flap Upgrade Specifications:
Stiff rubber flap
Metal hold down bar
Optional Hydroturn Specifications:
Parker hydraulics system with built in relief valve overload protection
Hydraulic system is completely sealed for life
Full radius turn in just 5 seconds while driving
Heavy duty chrome plated 3/4 inch cylinder shafts
Two bolt installation of hydraulic cylinder and pump
No modifications necessary
Wire harness utilizes weatherproof connectors
Backwards compatible with manual turning system
Overload protection of 4,000 lbs. of extension force and 3,500 lbs. of retraction force
Includes 3 year warranty
Optional Extended Length Push Tube:
Choose the push tube length that you need to fit your needs. If you have tracks, then choose the extended push tube to get the snow plow further out, giving you more room for the tracks to work without interference.
Optional Plow Markers:
Snow getting high or need to plow close to vehicles or other items? Get the snow plow markers so you can see exactly where the edge of your blade is, letting you have the most control.
Optional Plow Pulley Fairlead Kit:
The Snow Plow Pulley Fairlead Kit is designed specifically to resist wear from the steep angle that occurs between the fairlead and the plow, extending the life of your winch cable. It can be used with either a steel or synthetic cable and is constructed of black powder coated 7 gauge steel. There are two roller heights for different fairlead heights and angles and you'll receive hardware and instructions.
Standard spool pattern: 3" x 4-7/8"
Wide spool pattern: 3" x 6.67"
Optional Box Ends:
If you want to keep the snow from rolling our the sides of your Denali snow plow, get the box ends right here. These are 1/4" thick steel and include height and andle adjustable skid foot brackets. All the necessary installation instructions and hardware are included also.
Optional Additional Wearbar:
If you want to keep the edges of your snow plow in top shape the Denali Polyurethane Wearbar is the choice for you. Not only is the wearbar reversible for longer use, but the polyurethane construction outlasts rubber and steel. The wearbar won't cause damage to brick, concrete, curbs and more! The wearbar is the perfect choice to increase productivity and reduce equipment wear.
Optional Pushtube Lift Kits:
When your UTV has those monster tires or that beastly lift kit on it, using a snow plow in the winter can be a pain. Finding a solution that solves the problem of your pushtube matching the height of your machine can mean complete removal of your tires or lift. With the Denali Pushtube Lift Kit installed, you can keep your tires and lift kit on, while giving Jack Frost the boot! This Pushtube Lift Kit bolts directly to your existing Denali UTV Pushtube giving an easy install, the 2 inch lift will give you 13-15 inches off the ground, and the 4 inch will give you 15-17, all while meeting your snow plow needs!