- Does NOT fit Maverick X3 models.
- Must have a winch to use plow system.
2011-19 Can Am Commander and Commander Max
2013-18 Can Am Maverick and Maverick Max
2016-19 Can Am Defender and Defender Max
If you are looking for a way to optimize your Can Am for both work and play, you’ve come to the right place. Here at Side By Side Stuff we know that a SXS doesn’t have to be just a toy it can be so much more than just another play thing. That’s why we carry a full line of implements to help alleviate the work load that you have around the house. One product that’s sure to do just that is this Denali Pro Series Snow Plow System for your Can Am Commander or Maverick.
The Denali Pro Series Snow Plow System comes with everything you need to get to work when the flurries start falling. The kit includes everything from the high strength center mount plow mount, the push tube and the impressive Pro Series snow blade. The blade is 72” wide and features an angle that stands 23” tall at the highest point and 16” at the lowest. By adding the Denali snow plow to your machine you will be prepared for any amount of snow that Mother Nature throws at you.
County-style blade with curved design made of 12 gauge steel
Impact resistant reinforcement system disperses force of impact to the sturdiest part of the UTV, preventing damage from sudden impact
Includes edge stiffeners and stabilizer bar
Sand blasted, powder coated with epoxy primer and TGIC polyester top coat for corrosion protection, UV resistance and durability
Available in black, red or yellow
High strength, high yield 3/16 inch thick grade 50 steel wear bar
Angle blade is 23 inches on the tallest side and 16 inches on the shortest side
Rubber flap stabilizer bar with upgraded (stiffer) rubber flap
Plow markers included
Height and angle adjustable premium steel skid feet
Includes 3 year warranty on the plow blade against manufacturer defects
Push Tube Specifications:
Impact resistant reinforced pivot assembly
Turn system allows for easy blade positioning in different angles to the left or right - 0 degrees. 12.5 degrees and 25 degrees
Simple detachment systems with the pull of a pin
Structural tube steel cross bar for added lateral rigidity
Plow Mount Specifications:
100% laser cut 1/4 inch steel
Slotted holes allow blade to hug the ground
Optional Hydroturn Specifications:
Parker hydraulics system with built in relief valve overload protection
Hydraulic system is completely sealed for life
Full radius turn in just 5 seconds while driving
Heavy duty chrome plated 3/4 inch cylinder shafts
Two bolt installation of hydraulic cylinder and pump
No modifications necessary
Wire harness utilizes weatherproof connectors
Backwards compatible with manual turning system
Overload protection of 4,000 lbs. of extension force and 3,500 lbs. of retraction force
Includes 3 year warranty
Optional Push Tube Length:
Choose the push tube length that you need to fit your needs. If you have tracks, then choose the extended push tube to get the snow plow further out, giving you more room for the tracks to work without interference.
Optional Plow Pulley Fairlead Kit:
The Plow Pulley Fairlead Kit is designed specifically to resist wear from the steep angle that occurs between the fairlead and the plow, extending the life of your winch cable. It can be used with either a steel or synthetic cable and is constructed of black powder coated 7 gauge steel. There are two roller heights for different fairlead heights and angles and you'll receive hardware and instructions.