- CANNOT SHIP TO ALASKA OR HAWAII.
- Must have a winch to use plow system.
- On 2012-13 Coleman 800 models, two (2) holes are required to be drilled and tapped. This will NOT void the manufacturer's warranty on the UTV or plow.
When the snow starts to pile up don’t get caught unprepared and have to pay someone to clear your drive. Be ready to use your Coleman UTV to get that snow moved quicker and easier than ever before with this Denali Series 72” Snow Plow System. The system comes packed with lots of goodies and accessory options, let’s take a look!
These snow plows feature a quality of construction that remains unmatched by the competition. The snow blade is an impressive 72” wide and an impressive angled blade with a maximum height of 23” and a low side blade height of 16”. Pushing the plow is a breeze with the included high strength steel center push tube system and its quick attach steel plow mount that is designed specifically for the Coleman line of UTV’s. If you are looking to further alleviate your work load you can further outfit the plow systems with any number of accessories to take out all the work of plowing, with optional blade angle adjustment systems, plow rollers, markers and so much more so be sure to check those out below.
County-style blade with curved design made of 12 gauge steel
Impact resistant reinforcement system disperses force of impact to the sturdiest part of the UTV, preventing damage from sudden impact
Includes edge stiffeners and stabilizer bar
Sand blasted, powder coated with epoxy primer and TGIC polyester top coat for corrosion protection, UV resistance and durability
Available in black, red or yellow
High strength, high yield 3/16 inch thick grade 50 steel wear bar
Angle blade is 23 inches on the tallest side and 16 inches on the shortest side
Rubber flap stabilizer bar with upgraded (stiffer) rubber flap
Plow markers included
Height and angle adjustable premium steel skid feet
Includes 3 year warranty on the plow blade against manufacturer defects
Push Tube Specifications:
Impact resistant reinforced pivot assembly
Turn system allows for easy blade positioning in different angles to the left or right - 0 degrees. 12.5 degrees and 25 degrees
Simple detachment systems with the pull of a pin
Structural tube steel cross bar for added lateral rigidity
Plow Mount Specifications:
100% laser cut 1/4 inch steel
Slotted holes allow blade to hug the ground
Optional Hydroturn Specifications:
Parker hydraulics system with built in relief valve overload protection
Hydraulic system is completely sealed for life
Full radius turn in just 5 seconds while driving
Heavy duty chrome plated 3/4 inch cylinder shafts
Two bolt installation of hydraulic cylinder and pump
No modifications necessary
Wire harness utilizes weatherproof connectors
Backwards compatible with manual turning system
Overload protection of 4,000 lbs. of extension force and 3,500 lbs. of retraction force
Includes 3 year warranty
Optional Push Tube Length:
Choose the push tube length that you need to fit your needs. If you have tracks, then choose the extended push tube to get the snow plow further out, giving you more room for the tracks to work without interference.
Optional Plow Pulley Fairlead Kit:
The Plow Pulley Fairlead Kit is designed specifically to resist wear from the steep angle that occurs between the fairlead and the plow, extending the life of your winch cable. It can be used with either a steel or synthetic cable and is constructed of black powder coated 7 gauge steel. There are two roller heights for different fairlead heights and angles and you'll receive hardware and instructions.