- CANNOT SHIP TO ALASKA OR HAWAII.
- Must have a winch to use plow system.
Applicability: 2015-16 Cub Cadet Challenger 500 and Challenger 700
Having a Cub Cadet Challenger 700 during winter is a fun way to make the snow fly! Did you know it could also be used as an essential tool in snow removal? The hours of backbreaking work to clear the driveway and sidewalks can be spent inside with some hot chocolate with the Denali 72 Inch Pro Series Snow Plow. This complete plow system is a great addition to your side by side.
A 100% laser cut, 1/4-inch steel, model specific plow mount is included in this kit to ensure a snug fit to your UTV. An impact resistant, reinforced pivot assembly includes a turning system that allows for easy blade positioning in different angles. Lastly, the blade is made of impressive 12-gauge steel with a grade 50 steel wear bar and rubber flap stabilizer bar included to ensure many winters of plowing. The blade is sandblasted, powder coated with epoxy primer and TGIC polyester top coat for corrosion protection, UV resistance and durability. This winter, give yourself a break and let your side by side to the dirty work so you can enjoy the winter wonderland instead of dreading it.
County-style blade with curved design made of 12 gauge steel
Impact resistant reinforcement system disperses force of impact to the sturdiest part of the UTV, preventing damage from sudden impact
Includes edge stiffeners and stabilizer bar
Sand blasted, powder coated with epoxy primer and TGIC polyester top coat for corrosion protection, UV resistance and durability
Available in black, red or yellow
High strength, high yield 3/16 inch thick grade 50 steel wear bar
Angle blade is 23 inches on the tallest side and 16 inches on the shortest side
Rubber flap stabilizer bar with upgraded (stiffer) rubber flap
Plow markers included
Height and angle adjustable premium steel skid feet
Includes 3 year warranty on the plow blade against manufacturer defects
Push Tube Specifications:
Impact resistant reinforced pivot assembly
Turn system allows for easy blade positioning in different angles to the left or right - 0 degrees. 12.5 degrees and 25 degrees
Simple detachment systems with the pull of a pin
Structural tube steel cross bar for added lateral rigidity
Plow Mount Specifications:
100% laser cut 1/4 inch steel
Slotted holes allow blade to hug the ground
Optional Hydroturn Specifications:
Parker hydraulics system with built in relief valve overload protection
Hydraulic system is completely sealed for life
Full radius turn in just 5 seconds while driving
Heavy duty chrome plated 3/4 inch cylinder shafts
Two bolt installation of hydraulic cylinder and pump
No modifications necessary
Wire harness utilizes weatherproof connectors
Backwards compatible with manual turning system
Overload protection of 4,000 lbs. of extension force and 3,500 lbs. of retraction force
Includes 3 year warranty
Optional Push Tube Length:
Choose the push tube length that you need to fit your needs. If you have tracks, then choose the extended push tube to get the snow plow further out, giving you more room for the tracks to work without interference.
Optional Plow Pulley Fairlead Kit:
The Plow Pulley Fairlead Kit is designed specifically to resist wear from the steep angle that occurs between the fairlead and the plow, extending the life of your winch cable. It can be used with either a steel or synthetic cable and is constructed of black powder coated 7 gauge steel. There are two roller heights for different fairlead heights and angles and you'll receive hardware and instructions.
Standard spool pattern: 3" x 4-7/8"
Wide spool pattern: 3" x 6.67"
Denali Plow, February 18, 2021
Posted By: Doug Grinnell - verified customer
This plow is awesome. It moves more snow than I thought it could. I have it attached to a Cub Cadet Challenger 700. Attaching it was simple with the included hardware and instructions. Side by Side Stuff staff was very friendly and helpful. Recieved the plow within 3 days.