- CANNOT SHIP TO ALASKA OR HAWAII.
- Must have a winch to use plow system.
Applicability: 2020 Arctic Cat Prowler Pro and Prowler Pro Crew
With the winter season just around the corner, it's time to start thinking about prepping for the cold, white stuff. Did you know that your buggy is a snow removal mean machine? All you need is the right aftermarket accessory system and boom; you go from farm hand to snow shovel in minutes. One kit that has Side By Side Stuff excited is the Denali 72 Inch Pro Series Snow Plow System for a Prowler Pro. This system is decked out from the blade to the push tube! Let's hit some of the highlights on what makes this the ideal UTV snow plow system for you.
This blade is engineered impeccably from the bottom to the top. Denali forms the component from 12-gauge powder-coated steel with an impact reinforcement system, grade 50 steel wear bars and edge stiffeners. The side by side snow plow has the grit to last winter after winter, without rusting or wearing. Along with this stellar blade, the system's push tube is a game-changer. No more do you have to dread removal or installation as this puppy is created to detach or hook-up with one pull of a pin. You get to remove snow, unhitch, then boom, you're ready to move on to the next task hassle-free. Bring some versatility to your offroad experience when you shop Arctic Cat snow plows from SideBySideStuff.com!
County-style blade with curved design made of 12 gauge steel
Impact resistant reinforcement system disperses force of impact to the sturdiest part of the UTV, preventing damage from sudden impact
Includes edge stiffeners and stabilizer bar
Sand blasted, powder coated with epoxy primer and TGIC polyester top coat for corrosion protection, UV resistance and durability
Available in black, red or yellow
High strength, high yield 3/16 inch thick grade 50 steel wear bar
Angle blade is 23 inches on the tallest side and 16 inches on the shortest side
Rubber flap stabilizer bar with upgraded (stiffer) rubber flap
Plow markers included
Height and angle adjustable premium steel skid feet
Includes 3 year warranty on the plow blade against manufacturer defects
Push Tube Specifications:
Impact resistant reinforced pivot assembly
Turn system allows for easy blade positioning in different angles to the left or right - 0 degrees, 12.5 degrees and 25 degrees
Simple detachment systems with the pull of a pin
Structural tube steel cross bar for added lateral rigidity
Plow Mount Specifications:
100% laser cut 1/4 inch steel
Slotted holes allow blade to hug the ground
Optional Hydroturn Specifications:
Parker hydraulics system with built in relief valve overload protection
Hydraulic system is completely sealed for life
Full radius turn in just 5 seconds while driving
Heavy duty chrome plated 3/4 inch cylinder shafts
Two bolt installation of hydraulic cylinder and pump
No modifications necessary
Wire harness utilizes weatherproof connectors
Backwards compatible with manual turning system
Overload protection of 4,000 lbs. of extension force and 3,500 lbs. of retraction force
Includes 3 year warranty
Optional Push Tube Length:
Choose the push tube length that you need to fit your needs. If you have tracks, then choose the extended push tube to get the snow plow further out, giving you more room for the tracks to work without interference.
Optional Plow Pulley Fairlead Kit:
The Plow Pulley Fairlead Kit is designed specifically to resist wear from the steep angle that occurs between the fairlead and the plow, extending the life of your winch cable. It can be used with either a steel or synthetic cable and is constructed of black powder coated 7 gauge steel. There are two roller heights for different fairlead heights and angles and you'll receive hardware and instructions.
Standard spool pattern: 3" x 4-7/8"
Wide spool pattern: 3" x 6.67"
Optional Pushtube Lift Kits:
When your UTV has those monster tires or that beastly lift kit on it, using a snow plow in the winter can be a pain. Finding a solution that solves the problem of your pushtube matching the height of your machine can mean complete removal of your tires or lift. With the Denali Pushtube Lift Kit installed, you can keep your tires and lift kit on, while giving Jack Frost the boot! This Pushtube Lift Kit bolts directly to your existing Denali UTV Pushtube giving an easy install, the 2 inch lift will give you 13-15 inches off the ground, and the 4 inch will give you 15-17, all while meeting your snow plow needs!