- CANNOT SHIP TO ALASKA OR HAWAII.
- Must have a winch to use plow system.
Applicability: Hisun HS 500 and HS 700
Are you tired of having to ask your buddies come rescue you from your snow-covered driveway every Winter? Or even suffering the back-breaking work of shoveling the snow by hand? If so, you might be thinking to yourself, “It sure would be nice to own a Denali 72-Inch Standard Series Plow System, for my Hisun HS.” Don’t worry, you’ve come to the right place! This Denali Plow System is sure to knock out snow removal in no time!
The blade is designed with a 19"" scoop at a 65-degree angle to gather large amounts of snow quicker and easier than ever. With a center mounting design, this plow is sure to last, even if you happen to experience sudden impact from a tree stump or large rock. Several options are available to choose from, such as a rubber flap upgrade, plow markers, a plow roller and even box ends, giving you the freedom to customize your plow to fit your specific needs. Pick up this Denali 72-Inch Standard Series Plow System and stop breaking a sweat about what Winter has in store this year!
11 gauge steel leading horizontal supports
Four 7 gauge ribs run the full length of the blade
Three additional 7 gauge horizontal stabilizers support the deepest point of the blade
65 degree attack angle and over center design ensures snow rolls up and is thrown forward
Replaceable 7 gauge, grade 50 steel wear bar
Height and angle adjustable skid feet included
Center mounted plow disperses force of impact to the sturdiest part of the UTV, preventing damage from sudden impact
3 year warranty
Push Tube Specifications:
Impact resistant reinforced pivot assembly
Turn system allows for easy blade positioning in different angles to the left or right - 0 degrees, 12.5 degrees and 25 degrees
Simple detachment systems with the pull of a pin
Structural tube steel cross bar for added lateral rigidity
Plow Mount Specifications:
100% laser cut 1/4 inch steel
Slotted holes allow blade to hug the ground
Optional Rubber Flap Upgrade Specifications:
Stiff rubber flap
Metal hold down bar
Optional Hydroturn Specifications:
Parker hydraulics system with built in relief valve overload protection
Hydraulic system is completely sealed for life
Full radius turn in just 5 seconds while driving
Heavy duty chrome plated 3/4 inch cylinder shafts
Two bolt installation of hydraulic cylinder and pump
No modifications necessary
Wire harness utilizes weatherproof connectors
Backwards compatible with manual turning system
Overload protection of 4,000 lbs. of extension force and 3,500 lbs. of retraction force
Includes 3 year warranty
Optional Push Tube Length:
Choose the push tube length that you need to fit your needs. If you have tracks, then choose the extended push tube to get the snow plow further out, giving you more room for the tracks to work without interference.
Optional Plow Markers:
Snow getting high or need to plow close to vehicles or other items? Get the snow plow markers so you can see exactly where the edge of your blade is, letting you have the most control.
Optional Plow Pulley Fairlead Kit:
The Plow Pulley Fairlead Kit is designed specifically to resist wear from the steep angle that occurs between the fairlead and the plow, extending the life of your winch cable. It can be used with either a steel or synthetic cable and is constructed of black powder coated 7 gauge steel. There are two roller heights for different fairlead heights and angles and you'll receive hardware and instructions.
Standard spool pattern: 3" x 4-7/8"
Wide spool pattern: 3" x 6.67"
Optional Box Ends:
If you want to keep the snow from rolling our the sides of your Denali snow plow, get the box ends right here. These are 1/4" thick steel and include height and angle adjustable skid foot brackets. All the necessary installation instructions and hardware are included also.
Optional Pushtube Lift Kits:
When your UTV has those monster tires or that beastly lift kit on it, using a snow plow in the winter can be a pain. Finding a solution that solves the problem of your pushtube matching the height of your machine can mean complete removal of your tires or lift. With the Denali Pushtube Lift Kit installed, you can keep your tires and lift kit on, while giving Jack Frost the boot! This Pushtube Lift Kit bolts directly to your existing Denali UTV Pushtube giving an easy install, the 2 inch lift will give you 13-15 inches off the ground, and the 4 inch will give you 15-17, all while meeting your snow plow needs!
Good product, February 20, 2018
Posted By: Ed Altman 3 people found this review helpful
This plow is heavy duty very easy to assemble and install well made product.