- CANNOT SHIP TO ALASKA OR HAWAII.
- Must have a winch to use plow system.
- Does NOT work with a 2" front receiver hitch installed.
Applicability: Kubota RTV 400 / RTV 500 / RTV 900 / RTV 1100 - NOT RTV X900
Fits 2004-09 Kubota RTV 900 with 1-1/4" front hitch
Fits 2011-12 Kubota RTV 900 with new style rectangle tube bumper
Fits 2008-10 Kubota RTV 1100 with 1-1/4" front hitch
Fits 2011-12 Kubota RTV 1100 with new style rectangle tube bumper
Fits 2013-20 Kubota RTV 500 / 900 / 1100 with 1-1/4" front hitch
If you own a Kubota, you know there is no task too big and no environment to harsh. That is, as long as your equipped with adequate aftermarket accessories. How about when snowfall is right around the corner? Investing in an RTV 1100 72 Inch Standard Series Snow Plow System could be the difference between backbreaking labor and sitting cozy in your cabin. Both will get the work done, but with the UTV snow plow bringing power gains to the mix, snow removal will be less time consuming and more efficient.
So, how does the side by side snow plow system hold up in the bitter wet climate while productively pushing snow? The answer lies in the heavy-duty powder-coated steel construction, the adjustability, and the integrated impact-resistant reinforcement system. It can be moved horizontally and vertically, which allows the user to manipulate the RTV 900 plow to meet the terrain demands. Denali also includes a pull-pin push tube assembly with the kit making removal hassle-free. Take winter head-on when you get outfitted with the Kubota snow plow system.
11 gauge steel leading horizontal supports
Four 7 gauge ribs run the full length of the blade
Three additional 7 gauge horizontal stabilizers support the deepest point of the blade
65 degree attack angle and over center design ensures snow rolls up and is thrown forward
Replaceable 7 gauge, grade 50 steel wear bar
Height and angle adjustable skid feet included
Center mounted plow disperses force of impact to the sturdiest part of the UTV, preventing damage from sudden impact
3 year warranty
Push Tube Specifications:
Impact resistant reinforced pivot assembly
Turn system allows for easy blade positioning in different angles to the left or right - 0 degrees. 12.5 degrees and 25 degrees
Simple detachment systems with the pull of a pin
Structural tube steel cross bar for added lateral rigidity
Plow Mount Specifications:
100% laser cut 1/4 inch steel
Slotted holes allow blade to hug the ground
Optional Rubber Flap Upgrade Specifications:
Stiff rubber flap
Metal hold down bar
Optional Hydroturn Specifications:
Parker hydraulics system with built in relief valve overload protection
Hydraulic system is completely sealed for life
Full radius turn in just 5 seconds while driving
Heavy duty chrome plated 3/4 inch cylinder shafts
Two bolt installation of hydraulic cylinder and pump
No modifications necessary
Wire harness utilizes weatherproof connectors
Backwards compatible with manual turning system
Overload protection of 4,000 lbs. of extension force and 3,500 lbs. of retraction force
Includes 3 year warranty
Optional Push Tube Length:
Choose the push tube length that you need to fit your needs. If you have tracks, then choose the extended push tube to get the snow plow further out, giving you more room for the tracks to work without interference.
Optional Plow Markers:
Snow getting high or need to plow close to vehicles or other items? Get the snow plow markers so you can see exactly where the edge of your blade is, letting you have the most control.
Optional Plow Pulley Fairlead Kit:
The Plow Pulley Fairlead Kit is designed specifically to resist wear from the steep angle that occurs between the fairlead and the plow, extending the life of your winch cable. It can be used with either a steel or synthetic cable and is constructed of black powder coated 7 gauge steel. There are two roller heights for different fairlead heights and angles and you'll receive hardware and instructions.
Standard spool pattern: 3" x 4-7/8"
Wide spool pattern: 3" x 6.67"
Optional Box Ends
If you want to keep the snow from rolling our the sides of your Denali snow plow, get the box ends right here. These are 1/4" thick steel and include height and angle adjustable skid foot brackets. All the necessary installation instructions and hardware are included also.
Optional Pushtube Lift Kits:
When your UTV has those monster tires or that beastly lift kit on it, using a snow plow in the winter can be a pain. Finding a solution that solves the problem of your pushtube matching the height of your machine can mean complete removal of your tires or lift. With the Denali Pushtube Lift Kit installed, you can keep your tires and lift kit on, while giving Jack Frost the boot! This Pushtube Lift Kit bolts directly to your existing Denali UTV Pushtube giving an easy install, the 2 inch lift will give you 13-15 inches off the ground, and the 4 inch will give you 15-17, all while meeting your snow plow needs!
I have had three [other brand] snow plows, this one is made so much better. No snow yet but soon. I live at 8000 ft. in the Colorado mountains so I know it's coming. Received plow very fast, S.B.S.S. is good to work with, will be ordering a cab enclosure soon.