- CANNOT SHIP TO ALASKA OR HAWAII.
- Must have a winch to use plow system.
- Does NOT work with a 2" front receiver hitch installed.
Applicability: Kubota RTV 400 / RTV 500 / RTV 900 / RTV 1100 - NOT RTV X900
Fits 2004-09 Kubota RTV 900 with 1-1/4" front hitch
Fits 2011-12 Kubota RTV 900 with new style rectangle tube bumper
Fits 2008-10 Kubota RTV 1100 with 1-1/4" front hitch
Fits 2011-12 Kubota RTV 1100 with new style rectangle tube bumper
Fits 2013-20 Kubota RTV 500 / 900 / 1100 with 1-1/4" front hitch
Your Kubota RTV 900 or Kubota RTV 1100 was built with the power and durability to tackle the toughest tasks, so why let a little snow stop you? With the Denali Standard Series Snow Plow made with a 19" scoop blade and a 65 degree attack angle you can't go wrong. This center mounted plow disperses force of impact to the sturdiest part of the UTV, preventing damage from sudden impact.
Enabled with a simple detachment system, both attaching and detaching is done in no time with the pull of a pin. Along with USA made plow mount, you'll receive the plow blade and push tube. There's an optional rubber flap and hydroturn options with this model available also.
11 gauge steel leading horizontal supports
Four 7 gauge ribs run the full length of the blade
Three additional 7 gauge horizontal stabilizers support the deepest point of the blade
65 degree attack angle and over center design ensures snow rolls up and is thrown forward
Replaceable 7 gauge, grade 50 steel wear bar
Height and angle adjustable skid feet included
Center mounted plow disperses force of impact to the sturdiest part of the UTV, preventing damage from sudden impact
3 year warranty
Push Tube Specifications:
Impact resistant reinforced pivot assembly
Turn system allows for easy blade positioning in different angles to the left or right - 0 degrees. 12.5 degrees and 25 degrees
Simple detachment systems with the pull of a pin
Structural tube steel cross bar for added lateral rigidity
Plow Mount Specifications:
100% laser cut 1/4 inch steel
Slotted holes allow blade to hug the ground
Optional Rubber Flap Upgrade Specifications:
Stiff rubber flap
Metal hold down bar
Optional Hydroturn Specifications:
Parker hydraulics system with built in relief valve overload protection
Hydraulic system is completely sealed for life
Full radius turn in just 5 seconds while driving
Heavy duty chrome plated 3/4 inch cylinder shafts
Two bolt installation of hydraulic cylinder and pump
No modifications necessary
Wire harness utilizes weatherproof connectors
Backwards compatible with manual turning system
Overload protection of 4,000 lbs. of extension force and 3,500 lbs. of retraction force
Includes 3 year warranty
Optional Push Tube Length:
Choose the push tube length that you need to fit your needs. If you have tracks, then choose the extended push tube to get the snow plow further out, giving you more room for the tracks to work without interference.
Optional Plow Markers:
Snow getting high or need to plow close to vehicles or other items? Get the snow plow markers so you can see exactly where the edge of your blade is, letting you have the most control.
Optional Plow Pulley Fairlead Kit:
The Plow Pulley Fairlead Kit is designed specifically to resist wear from the steep angle that occurs between the fairlead and the plow, extending the life of your winch cable. It can be used with either a steel or synthetic cable and is constructed of black powder coated 7 gauge steel. There are two roller heights for different fairlead heights and angles and you'll receive hardware and instructions.
Standard spool pattern: 3" x 4-7/8"
Wide spool pattern: 3" x 6.67"
Optional Box Ends:
If you want to keep the snow from rolling out the sides of your Denali snow plow, get the box ends right here. These are 1/4" thick steel and include height and angle adjustable skid foot brackets. All the necessary installation instructions and hardware are included also.
Optional Additional Wearbar:
If you want to keep the edges of your snow plow in top shape the Denali Polyurethane Wearbar is the choice for you. Not only is the wearbar reversible for longer use, but the polyurethane construction outlasts rubber and steel. The wearbar won't cause damage to brick, concrete, curbs and more! The wearbar is the perfect choice to increase productivity and reduce equipment wear.
Great, December 12, 2016
Posted By: Tommie Sperrazza - verified customer 2 people found this review helpful
Be proud of made in USA. It should be stamped on what you make. I'm am proud you should be also and show it.
Posted By: Charlie - verified customer 7 people found this review helpful
I have not used it yet for snow but I use it in the gravel drive worked fine. I had with the plow mount they sent but called them and sent some pictures and they got right on the problem. they sent me the info needed to return the wrong mount and sent me a a different one that fit correctly. I could not be happier the plow or side by side.