NOTE: Powder coating the springs will void any warranty. If you wish to paint your springs, you must use a different method.
Applicability: 2018-20 Polaris RZR RS1
You knew the second you bought your Polaris RZR RS1 that you were going to put a phat lift kit on that bad boy. What you didn't account for is the fact that your rugged abuse has royally ticked off your suspension! Suspension drooping is very common in the UTV world because of the nature of the unpredictable terrain and how you offroad outlaws push the limits of your experience. The fix is easy enough when you simply get your hands on these aftermarket High Lifter Big Lift Helper Front Springs!
The concept is easy, the SxS springs support your suspension components by maintaining the load in keeping in contact with the spring perch when you're in full droop. This will help in eliminating sag while also hooking your RZR RS1 up with a possible two inches of additional clearance. If you're sporting solid spacers, you will indefinitely see improvement in your travels! What are you waiting for? Increase your ride quality with the UTV aftermarket helper springs available at Side By Side Stuff!Features:
View Installation Instructions
- Set of two (2) front springs
- Helps eliminate suspension sag
- Can add up to 2" to any lift kit
- Improves the ride of any lift that currently uses solid spacers
This product can expose you to chemicals including Chromium, which is known in the State of California to cause cancer and birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov