- PLEASE READ: THERE ARE NO RETURNS OR REFUNDS ON THIS PREMOUNTED KIT.
- CANNOT SHIP TO CANADA.
- Can Am Maverick X3 typically requires you to remove or grind down the wear plates located in the front (knuckle) and rear (deflector).
Set includes 4 wheels, 4 tires 4 center caps and 4 beadlock rings. Does NOT include lug nuts.
Method 401 Machined Beadlock Wheels:
If you are ready to take things up a notch with a new set of wheels and tires on your Yamaha, Polaris or Can Am, Side By Side Stuff is here to help you find the right set. The Method 401 Machined Beadlock Wheel is designed for the roughest and most rugged terrain you can find whether you are rock climbing or racing.The forged beadlock ring and zinc hardware will allow you to air down your tires as needed when things start getting serious. If you are not an extreme rider, you will be glad to know the Method rims have the rugged good looks to turn heads.
Load rating of 1600 lbs. per wheel
14x7 wheels weigh 14.2 lbs. and 15x7 wheels weigh 16.8 to 18 lbs.
Forged 6061 beadlock ring
Grade 8 Zinc plated mounting hardware
Premier wheel for enthusiast or serious racer
Tensor Regulator A|T 8-ply Radial Tires:
Pairing the Method wheels with the Tensor Regulator AT Tires, an all-terrain, 8-ply radial tire, gives you versatility to ride on any surface and do it with confidence. The variable pattern of the tread, inspired by truck tires, is quiet on hard surfaces but provides you the traction you need in deep mud or loose sand. The nylon reinforced sidewall enhances the durability of this tire that will take you anywhere you want to go. Tensor tires are proudly made in the U.S.A, and Side By Side Stuff is proud to offer their outstanding products.
8 ply radial construction
Nylon reinforcement layer
Steel belted inner and outer bead
Tread design off truck tires
Variable tread pattern for smoothest, quietest ride possible
Deep tread lugs on shoulders give you improved cornering traction
Wider footprint for enhanced handling and braking
All terrain tire
Speed rating is R(106 mph)
Tread depth of 19/32" deep
Max air pressure of 32 psi
Minimum rim width suggested is 6" and maximum suggested is 8.5"
Bolt Patterns and Offsets Available:
Bobcat Wheels: 4/156 pattern, 14x7 offset is 4+3 (+13mm) (5+2 / +38mm offset is available upon request ONLY), 15x7 offset is 4+3 (+13mm)
Can-Am Wheels: 4/137 pattern, 14x7 offset is 5+2 (+38mm) (4+3 / +13mm offset is available upon request ONLY)
Honda Pioneer 1000 Wheels: 4/137 pattern, 14x7 offset is 5+2 (+38mm) (4+3 / +13mm offset is available upon request ONLY)
John Deere Gator 550 and RSX 850 Wheels: 4/137 pattern, 14x7 offset is 5+2 (+38mm) (4+3 / +13mm offset is available upon request ONLY)
Kawasaki Wheels (Except Mule PRO-Series and Teryx KRX models): 4/137 pattern, 14x7 offset is 5+2 (+38mm) (4+3 / +13mm offset is available upon request ONLY)
Warning: Wheels: This product can expose you to chemicals, including 3,3'-Dimethylbenzidine (ortho0 Tolidine), 3,3'-Dimethylbenzidine-based dyes metabolized to 3,3'-dimethylbenzidine, 3,3'-Dimethylbenzidine dihydrochloride, Ethylbenzene, Soot, Tars and Mineral Oils (untreated and mildly treated oils and used engine oils) and Titanium dioxide, which is known to the State of California to cause cancer. Tires: This product can expose you to chemicals including chromium, lead and nickel, which are known to the State of California to cause cancer or birth defects or other reproductive harm For more information, go to www.P65Warnings.ca.gov