Applicability: 2016-18 Polaris General 1000 and General 4 1000
As any UTV enthusiast knows, sometimes you just want to take your Polaris General out on the trails and get dirty! Roaring through uncharted territory as quickly as you can is a great way to push your machine to its limits and have a great time. After multiple rides through dusty, dirty terrains though, you'll want to check your machine to make sure it's still running in tip-top shape. A great aftermarket accessory to add to your machine to make sure your air filter stays clean for many rides to come is the Particle Separator by S&B Filters.
Attaching directly to the stock intake system, installation is fairly quick and easy with no drilling or cutting on your machine required. With an efficiency rate of 94%, your air filter should last much longer than it normally would without this accessory. S&B Filters backs their product with a 5 Year Limited manufacturer's warranty. Upgrade your machine with this particle separator today!
Product dimensions: 20.2" wide x 10.5" high x 10" deep
Weighs 10 lbs.
Duct length of 39"
Clamp diameter of 1.75"
Efficiency rate of 94%
Amp draw of 3.1 amps
Attached directly to the stock intake system
Installation takes approximately 1 hour with no drilling or cutting on your machine required
Warning: This product can expose you to chemicals including carbon black, lead and lead compounds, silica, crystalline, which are known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov