Super ATV High Clearance Front A-Arms - Polaris RZR S 1000 | S 900
SSL Secured
Expert Support
Product Description
NOTES:
- Does not include ball joints.
- Does NOT fit 2016 Polaris RZR S 1000.
- Orange and White Aluminum are only available for the 2015-16 RZR S 900 and RZR 4 900.
Applicability: Fits
Climbing rocks and battling trails has become one of your new favorite hobbies in your Polaris RZR S 1000 and RZR S 900. While you enjoy it, those pesky boulders have begun to cause damage to your OEM arms, often causing them to break and need to be replaced. When this happens, it is time to look into a stronger option. Super ATV High Clearance Front A-Arms will give you an additional two-inches of clearance that is needed to tackle those tougher obstacles.
These a-arms are manufactured from 1 1/4 - inch tube making them 25% larger and much stronger than OEM. Each arm has a unique dual bend design that is carefully crafted to maintain the geometry of factory steering. To ensure the camber of the side by side is adjusted correctly, the a-arms will come with adjustable pivot blocks for your convenience. A lifetime manufacturer warranty will have you covered under almost any circumstance. Installation instructions are also listed below for your benefit!
Features:
Optional All Balls Racing A-Arm Bushings:
Are your a-arm bushings becoming worn down and need to be replaced? All Balls Racing has come up with the perfect OEM replacement bushing for your machine. Each piece is designed to provide greater suspension travel and performance. Purchase yours today to replace just the front or both the front and rear and keep your machine in top notch!
Optional Pivot Works A-Arm Bushings:
When you need replacement a-arm bushings, we have the solution for you! Pivot Works created the perfect OEM replacement bushing for your UTV model. Each piece is designed get your steering under control and restore the precision feel that your machine had when it was new. Purchase yours today to replace those worn down parts!
Optional Ball Joints:
Manufactured and designed by All Balls Racing, this perfect OEM replacement ball joint is sure to impress. Their steel housing ensures toughness and durability. Each is made to be self lubricated to keep the joint from seizing. The POM-M90 bearing cup is designed to isolate the steel rod from the housing to prevent damage. If you're looking for the perfect replacement for your worn out ball joints, grab a set for your upper and lower joints today!
View Installation Instructions
- Does not include ball joints.
- Does NOT fit 2016 Polaris RZR S 1000.
- Orange and White Aluminum are only available for the 2015-16 RZR S 900 and RZR 4 900.
Applicability: Fits
- 2015-20 Polaris RZR S 900 / RZR 4 900 / RZR S 4 900
- 2017-20 Polaris RZR S 1000 and RZR S 4 1000
Climbing rocks and battling trails has become one of your new favorite hobbies in your Polaris RZR S 1000 and RZR S 900. While you enjoy it, those pesky boulders have begun to cause damage to your OEM arms, often causing them to break and need to be replaced. When this happens, it is time to look into a stronger option. Super ATV High Clearance Front A-Arms will give you an additional two-inches of clearance that is needed to tackle those tougher obstacles.
These a-arms are manufactured from 1 1/4 - inch tube making them 25% larger and much stronger than OEM. Each arm has a unique dual bend design that is carefully crafted to maintain the geometry of factory steering. To ensure the camber of the side by side is adjusted correctly, the a-arms will come with adjustable pivot blocks for your convenience. A lifetime manufacturer warranty will have you covered under almost any circumstance. Installation instructions are also listed below for your benefit!
Features:
- Unique bend design adds 2” of ground clearance
- 0" forward offset
- 1.25" tubing is 25% larger than stock
- Adjustable pivot blocks for full camber adjustability
- Includes high-quality UHMW bushings at no extra cost
- UV-resistant powder coat finish
- Easy to install
- Backed by a lifetime warranty (excludes ball joints and tie rod ends)
Optional All Balls Racing A-Arm Bushings:
Are your a-arm bushings becoming worn down and need to be replaced? All Balls Racing has come up with the perfect OEM replacement bushing for your machine. Each piece is designed to provide greater suspension travel and performance. Purchase yours today to replace just the front or both the front and rear and keep your machine in top notch!
- Designed to be an OEM replacement bushing
- Contains 52100 bearing steel that is hardened and precision ground
- Double lip seals Type TC
- Contains thrust shims and cup seal
- Kit contains components to replace the front or both front and rear a-arm bushings
Optional Pivot Works A-Arm Bushings:
When you need replacement a-arm bushings, we have the solution for you! Pivot Works created the perfect OEM replacement bushing for your UTV model. Each piece is designed get your steering under control and restore the precision feel that your machine had when it was new. Purchase yours today to replace those worn down parts!
- Designed to be an OEM replacement bushing
- All kits come complete with the necessary hardware to do both the left and right sides
- Restores precision feel of new machine
Optional Ball Joints:
Manufactured and designed by All Balls Racing, this perfect OEM replacement ball joint is sure to impress. Their steel housing ensures toughness and durability. Each is made to be self lubricated to keep the joint from seizing. The POM-M90 bearing cup is designed to isolate the steel rod from the housing to prevent damage. If you're looking for the perfect replacement for your worn out ball joints, grab a set for your upper and lower joints today!

