System 3 ST4 Gloss Black Wheel Set

NOTE: Can Am Maverick X3 typically requires you to remove or grind down the wear plates located in the front (knuckle) and rear (deflector).


Set includes 4 wheels, 4 center caps and 16 lug nuts (if required)


Get a load of these hella sweet UTV rims. If these accessories aren't the one thing that sets the mood for the whole ride, we don't know what is. The powersports community is always about who can one-up the next. With the likes of these tough looking rims mounted-up on your ground-pounding buggy, there won't be anyone out doing anything. Side By Side Stuff is a huge fan of this ST-4 Gloss Black and Machined Wheel Set by System 3. Here's why.

These aftermarket rims are just straight up stylish! System 3 crushed it with the brute 8-spoke polished black design complete with edgy machined accents. They look offroad tough, and boy are they. These side by side wheels are sporting a 1,000-pound load rating per unit. Yes, each! Plus, System 3 is so sure that these are the best of the best that they back these bad boys with a lifetime limited warranty. Don't wait for the next guy to roll up with the decked-out wheels, beat'em to the punch with your purchase today.


Features:

• Load rating of 1000 lbs. per wheel
• Stout 8-spoke shows its strength
• Factory-installed valve stem
• Bolt-in center cap
• Lifetime limited manufacturer warranty

Bolt Patterns and Offsets Available:

• Arctic Cat Havoc and Stampede Wheels: 4/137 pattern, 14x7 offset is 4+3 (+10mm) and 20x6.5 offset is 4+2.5 (+10mm)
  
• Arctic Cat Wildcat XX Wheels: 4/156 pattern, 14x7 offset is 4+3 (+10mm) and 20x6.5 offset is 4+2.5 (+10mm)
  
• Bobcat Wheels: 4/156 pattern, 14x7 offset is 4+3 (+10mm) and 20x6.5 offset is 4+2.5 (+10mm)
  
• Can-Am Wheels: 4/137 pattern, 14x7 offset is 4+3 (+10mm) and 20x6.5 offset is 4+2.5 (+10mm)
  
• CF Moto Wheels: 4/110 pattern, 14x7 offset is 4+3 (+10mm) or 2+5 (-47mm)
  
• Honda Wheels (Except Pioneer 1000 and Talon): 4/110 pattern, 14x7 offset is 4+3 (+10mm) or 2+5 (-47mm)
  
• Honda Pioneer 1000 Wheels: 4/137 pattern, 14x7 offset is 4+3 (+10mm) and 20x6.5 offset is 4+2.5 (+10mm)
  
• Honda Talon Wheels: 4/137 pattern, 20x6.5 offset is 4+2.5 (+10mm)
  
• John Deere Gator XUV 550 and RSX 850 Wheels: 4/137 pattern, 14x7 offset is 4+3 (+10mm) and 20x6.5 offset is 4+2.5 (+10mm)
  
• Kawasaki Wheels (Except Mule PRO-Series and Teryx KRX models): 4/137 pattern, 14x7 offset is 4+3 (+10mm) and 20x6.5 offset is 4+2.5 (+10mm)
  
• Kawasaki Teryx KRX 1000 Wheels: 4/156 pattern, 20x6.5 offset is 4+2.5 (+10mm)
  
• Kawasaki Mule PRO Series Wheels: 4/156 pattern, 14x7 offset is 4+3 (+10mm) and 20x6.5 offset is 4+2.5 (+10mm)
  
• Kubota RTV X900 / X1100 / X1120 Wheels: 4/110 pattern, 14x7 offset is 4+3 (+10mm) or 2+5 (-47mm)
  
• Kymco Wheels: 4/110 pattern, 14x7 offset is 4+3 (+10mm) or 2+5 (-47mm)
  
• Massimo Wheels: 4/110 pattern, 14x7 offset is 4+3 (+10mm) or 2+5 (-47mm)
  
• Textron Havoc and Stampede Wheels: 4/137 pattern, 14x7 offset is 4+3 (+10mm) and 20x6.5 offset is 4+2.5 (+10mm)
  
• Textron Wildcat XX Wheels: 4/156 pattern, 14x7 offset is 4+3 (+10mm) and 20x6.5 offset is 4+2.5 (+10mm)
  
• Polaris Wheels: 4/156 pattern, 14x7 offset is 4+3 (+10mm) and 20x6.5 offset is 4+2.5 (+10mm)
  
• Yamaha Rhino Wheels: 4/110 pattern, 14x7 offset is 4+3 (+10mm) or 2+5 (-47mm)
  
• Yamaha Viking Wheels: 4/110 pattern, 14x7 offset is 4+3 (+10mm) or 2+5 (-47mm)
  
• Yamaha Wolverine Wheels (Except RMAX models): 4/110 pattern, 14x7 offset is 4+3 (+10mm) or 2+5 (-47mm)
  
• 2021-22 Yamaha Wolverine RMAX models Wheels: 4/156 pattern, 14x7 offset is 4+3 (+10mm) and 20x6.5 offset is 4+2.5 (+10mm)
  
• 2016-18 Yamaha YXZ1000R Wheels: 4/110 pattern, 14x7 offset is 4+3 (+10mm) or 2+5 (-47mm)
  
• 2019-21 Yamaha YXZ1000R Wheels: 4/156 pattern, 14x7 offset is 4+3 (+10mm) and 20x6.5 offset is 4+2.5 (+10mm)