Universal UTV 100 Series Cab Heater and Installation Kit by Aqua-Hot

NOTE: This kit works on water cooled engines only.


The Universal UTV 200 Series Cab Heater and Installation Kit uses your engine's hot water to warm the cab, just like your car. Full cab enclosures go a long way towards keeping you from freezing in the winter by blocking the wind, but that only goes so far. Just imagine how comfortable you will be when you install one of the side-by-side hot water cab heaters in conjunction with your full cab enclosure....yeah, that would be pretty awesome, wouldn't it? This cab heater will do the trick from the Polaris Ranger and John Deer Gator, the Kawasaki Mule family, and Kubota RTV. It also works great with many other Powersports machines. The installation possibilities and applications are practically limitless.

This heater unit is sized right and has a mounting bracket that rotates 180 degrees, giving you the flexibility to mount this thing practically anywhere (floor, firewall, or under the dash). It puts out an estimated 4000 BTU of heat and draws 0-2 amps of electrical power. The integrated variable speed switch allows the operator to set the comfort level. This mounting kit comes with all the fittings and necessities you will need to get the job done. It even includes a hole saw to cut the perfect opening to get your hoses through the firewall. The diverter valve ensures that the engine's hot water will flow through the heater, providing plenty of heat. Get your UTV cab heater today and stay warm all winter long.


Heater Features:

• Maximum 4,000 BTUs per hour - fan output 100 CFM
• Rigid mounting bracket with 180-degree bracket rotation
• Locking clamp support
• Integrated variable-speed switch
• Constructed of high strength nylon 6/6 housing
• Box includes heater, mounting bracket, universal attachment screws and instructions

Heater Specifications:

• BTU max: 4,000/hr
• Fan output: 0 to 100cfm
• 12-v DC amp draw: 0.5 amps
• Size: 9.5" w x 5.5" d x 5.5" h
• Weight: 3.5 lbs

Installation Kit Features:

• Plumbs directly into 22mm, 3/4" or 1" radiator hoses
• Gives control of hot water throughput
• Protects against engine overheating
• Maximizes heat output
• Kit includes:
  • Aqua-Hot diverter manifold valve
  • Barbed fitting assortment: 1/2" NPT x 3/4"; 3/4" NPT x 1"; 3/4" NPT x 22mm
  • Backing plate
  • Drill bit - #9
  • Hole saw - 1.5" with pilot bit
  • Grommet - 1" bore x 1/4" groove
  • Heater hose - 10 feet x 3/4"
  • Constant tension clamps - #290
  • Worm drive clamps
  • 20 gauge red wire - 10 feet
  • Fuse holder - in-line blade type
  • Fuse - 5 amp spade type
  • Connectors - butt-end 18-22 gauge and tap-splice 18-22 gauge
  • Teflon tape roll

 View Installation Instructions