True Am Dual Battery Connection Kit

NOTE: Does NOT include battery.


There is one thing that every UTV owner has in common, the deep itching nerve to have your machine out do every guy in the park. In order to do that you are going to have to add some aftermarket accessories that are going require more power than what your factory stator is able to provide. In order to power both your machine and your accessories to get your machine to be the true center of attention Side By Side Stuff brings you the True Amalgamated Dual Battery Connection Kit. This kit was specifically designed to cater to the unique features of the stator charging system is most all the UTV's on the market today.

This is a universal fully automatic kit the provides for close proximity installation so that both batteries will be fully charged and you will have plenty of power in your primary battery. Always having enough juice and peace of mind knowing that the vital starting and engine functions will never fall short. This kit includes the True Am isolator that was been specifically designed for the unique functions in the UTV's stator. The isolators "smart" technology insures that the available amps from your vehicles stator are used first in order to maintain the primary battery and the second battery is connected only after reaching the acceptable voltage threshold. If the combined system does drop below the disconnect threshold the isolator disconnects making sure your primary battery is always fully charged. By not requiring a connection to the ignition or the charging source directly this kit will not infringe on most of the UTV's warranties.


Kit Includes:

• 1-UTV-SBI-15 with insulators and 3M Dual Lock™
• 1-12 inch black cable with 6mm (1/4″) lugs
• 1-12 inch red (primary) cable with 6mm (1/4″) lugs
• 1-18 inch red (secondary) cable with 6mm (1/4″) lugs
• Installation instructions

Isolator Features:

• Designed for multiple battery systems
• Allows you to run more accessories without draining your start battery
• Will connect once the start battery falls into charge mode
• Works with stock battery
• Independent design; will work with batteries with different attributes
• Waterproof construction
• Does not require connection to the ignition or directly to the charging source to operate
• Includes all wiring for simple installation
• Does not infringe on the vehicle warranty

 View Installation Instructions