Applicability: 2014-18 Massimo MSU 500 and MSU 700
As the temperature plummets and the snow starts falling, donít get caught by surprise. Instead be ready for it with this Denali 72Ē Standard Series Plow System for your Massimo MSU 500. By adding this plow you are taking the dreaded task of snow removal and making it an excuse to get your machine out and enjoy some drive time. Proudly offered here at SideBySideStuff.com this plow is a great implement to add, letís take a look!
When purchasing this plow system from us you are going to receive everything needed to install the plow system on your MSU 500 from the snow blade and push tube and even the plow mount. Each component that is included in the kit is made from high strength steel so even when the snow gets deep your plow can take the use and abuse. If you want to further relieve your workload you can add some or all of the accessories to the plow to further relieve your workload from with add-onís like a hydroturn, push tubes, plow markers and so much more. Take a look at the photos above and technical specs below to see how the Denali Standard Series Snow Plow benefits you and your Massimo MSU.
11 gauge steel leading horizontal supports
Four 7 gauge ribs run the full length of the blade
Three additional 7 gauge horizontal stabilizers support the deepest point of the blade
65 degree attack angle and over center design ensures snow rolls up and is thrown forward
Replaceable 7 gauge, grade 50 steel wear bar
Height and angle adjustable skid feet included
Center mounted plow disperses force of impact to the sturdiest part of the UTV, preventing damage from sudden impact
3 year warranty
Push Tube Specifications:
Impact resistant reinforced pivot assembly
Turn system allows for easy blade positioning in different angles to the left or right - 0 degrees. 12.5 degrees and 25 degrees
Simple detachment systems with the pull of a pin
Structural tube steel cross bar for added lateral rigidity
Plow Mount Specifications:
100% laser cut 1/4 inch steel
Slotted holes allow blade to hug the ground
Optional Rubber Flap Upgrade Specifications:
Stiff rubber flap
Metal hold down bar
Optional Hydroturn Specifications:
Parker hydraulics system with built in relief valve overload protection
Hydraulic system is completely sealed for life
Full radius turn in just 5 seconds while driving
Heavy duty chrome plated 3/4 inch cylinder shafts
Two bolt installation of hydraulic cylinder and pump
No modifications necessary
Wire harness utilizes weatherproof connectors
Backwards compatible with manual turning system
Overload protection of 4,000 lbs. of extension force and 3,500 lbs. of retraction force
Includes 3 year warranty
Optional Push Tube Length:
Choose the push tube length that you need to fit your needs. If you have tracks, then choose the extended push tube to get the snow plow further out, giving you more room for the tracks to work without interference.
Optional Plow Markers:
Snow getting high or need to plow close to vehicles or other items? Get the snow plow markers so you can see exactly where the edge of your blade is, letting you have the most control.
Optional Plow Pulley Fairlead Kit:
The Plow Pulley Fairlead Kit is designed specifically to resist wear from the steep angle that occurs between the fairlead and the plow, extending the life of your winch cable. It can be used with either a steel or synthetic cable and is constructed of black powder coated 7 gauge steel. There are two roller heights for different fairlead heights and angles and you'll receive hardware and instructions.
Standard spool pattern: 3" x 4-7/8"
Wide spool pattern: 3" x 6.67"
Optional Box Ends
If you want to keep the snow from rolling our the sides of your Denali snow plow, get the box ends right here. These are 1/4" thick steel and include height and angle adjustable skid foot brackets. All the necessary installation instructions and hardware are included also.
Optional Pushtube Lift Kits:
When your UTV has those monster tires or that beastly lift kit on it, using a snow plow in the winter can be a pain. Finding a solution that solves the problem of your pushtube matching the height of your machine can mean complete removal of your tires or lift. With the Denali Pushtube Lift Kit installed, you can keep your tires and lift kit on, while giving Jack Frost the boot! This Pushtube Lift Kit bolts directly to your existing Denali UTV Pushtube giving an easy install, the 2 inch lift will give you 13-15 inches off the ground, and the 4 inch will give you 15-17, all while meeting your snow plow needs!
Great product , January 27, 2018
Posted By: Travis - verified customer
Had high expectations and it definitely lived up to them. Pleasantly pleased.
Order was placed over a weekend, was contacted on Tuesday.from company representatives about my order. Arrangements were made to ship product as quickly. As possible. Received product as described and in the time frame expressed. Very pleased and will order again. Great service.