Yamaha Wolverine X2 Front Windshield
SSL Secure and
Privacy Guaranteed
SSL Secured
Expert Support
Product Description
NOTES:
- Does NOT fit Yamaha Wolverine X2 R-Spec models
- CANNOT ship outside of the lower 48 states.
- If a return is needed on this item, you MUST have the original packaging. Items will not be accepted without the packaging that it was delivered in.
Applicability: 2019-20 Yamaha Wolverine X2
Getting your Yamaha Wolverine X2 outfitted for work or play is essential for having the highest level of proficiency and functionality. Weather elements and environmental conditions can cause wear and tear on your vehicle as well as causing discomfort to you. The EMP D.O.T. Approved Safety Glass Front Windshield with Hand Wipers is a UTV aftermarket accessory that will greatly increase the degree of serviceability of your Wolverine X2. When paired with other UTV components the safety glass will also preserve the structure of the interior in the utility vehicle.
EMP is about quality using 1/4-inch thick laminated safety glass with a laser cut and CNC formed metal frame. The aftermarket windshield has impressive features like dual hand wiper blades, a rubber gasket seal with hood protection and adjustable vents for climate control. This heavy duty UTV glass windshield has a D.O.T. rating and was made right here in the U.S.A. An EMP safety glass windshield is a practical upgrade for your Wolverine X2 and can be found at Side By Side Stuff along with many other UTV aftermarket X2 accessories.
Features:
Shared Shipping Program: You pay $99.00 shipping/handling and Side By Side Stuff pays the rest.
- Does NOT fit Yamaha Wolverine X2 R-Spec models
- CANNOT ship outside of the lower 48 states.
- If a return is needed on this item, you MUST have the original packaging. Items will not be accepted without the packaging that it was delivered in.
Applicability: 2019-20 Yamaha Wolverine X2
Getting your Yamaha Wolverine X2 outfitted for work or play is essential for having the highest level of proficiency and functionality. Weather elements and environmental conditions can cause wear and tear on your vehicle as well as causing discomfort to you. The EMP D.O.T. Approved Safety Glass Front Windshield with Hand Wipers is a UTV aftermarket accessory that will greatly increase the degree of serviceability of your Wolverine X2. When paired with other UTV components the safety glass will also preserve the structure of the interior in the utility vehicle.
EMP is about quality using 1/4-inch thick laminated safety glass with a laser cut and CNC formed metal frame. The aftermarket windshield has impressive features like dual hand wiper blades, a rubber gasket seal with hood protection and adjustable vents for climate control. This heavy duty UTV glass windshield has a D.O.T. rating and was made right here in the U.S.A. An EMP safety glass windshield is a practical upgrade for your Wolverine X2 and can be found at Side By Side Stuff along with many other UTV aftermarket X2 accessories.
Features:
- 1/4" thick laminated safety glass
- DOT rated and etched into the glass
- Laser cut and CNC formed metal frame
- Must be used with the factory top as pictured
- Slide vent allows for airflow on warm days
- Rubber gasket seals and protects your hood
- Mounts with metal clamps
- Includes two hand operated wipers
- Made in Cleveland, Ohio
Shared Shipping Program: You pay $99.00 shipping/handling and Side By Side Stuff pays the rest.
Fitment
- 2019 Yamaha Wolverine X2
- 2020 Yamaha Wolverine X2 -
Important Info
- Cannot ship outside the lower 48 states
Customer Reviews
Product Reviews
Fitment issues with EMP Glass Windshields Wolverine X2 RSpec, July 18, 2019Posted By: Kip McDermott - verified customer
6 people found this review helpful
Build quality of the item is quite good and the mounting brackets work and install well. this issue with this windshield is that it does not fit well in overall height - the width is perfect though, To "make" it fit you must remove the hardware from the OEM roof center forward attachment points (bars that extend forward from the roll bar to the forward edge of the roofline) , you must also remove the center molded plastic roll bar mount retainer and leave it loose. Once you have accomplished this you have to force/jam the windshield up under the OEM roof basically lifting it about 1/2 ro 1 inch in the center... I was able to fabricate rubber stand offs for the front OEM roof brackets (2) and used new longer stainless steel hardware to re-attach the roof at those locations.. At the center roll bar molded plastic roll bar mount I built up that area using neoprene rubber weather stripping , reinstalled the metal roll bar bracket, and again, used new longer stainless steel hardware.. For 600$ it should fit much more easily and I do not believe the average joe schmoe could install this item without considerable trouble as I am a certificated aircraft mechanic as well as I did a stint as a mechanic at a large Yamaha Dealership which gave me a bit of a leg up install wise. Once again, for the money it should be easier to install. I have had 3 other UTVs that I have installed windshields on, all with plastic front windshields, without this much trouble.
6 people found this review helpful
Build quality of the item is quite good and the mounting brackets work and install well. this issue with this windshield is that it does not fit well in overall height - the width is perfect though, To "make" it fit you must remove the hardware from the OEM roof center forward attachment points (bars that extend forward from the roll bar to the forward edge of the roofline) , you must also remove the center molded plastic roll bar mount retainer and leave it loose. Once you have accomplished this you have to force/jam the windshield up under the OEM roof basically lifting it about 1/2 ro 1 inch in the center... I was able to fabricate rubber stand offs for the front OEM roof brackets (2) and used new longer stainless steel hardware to re-attach the roof at those locations.. At the center roll bar molded plastic roll bar mount I built up that area using neoprene rubber weather stripping , reinstalled the metal roll bar bracket, and again, used new longer stainless steel hardware.. For 600$ it should fit much more easily and I do not believe the average joe schmoe could install this item without considerable trouble as I am a certificated aircraft mechanic as well as I did a stint as a mechanic at a large Yamaha Dealership which gave me a bit of a leg up install wise. Once again, for the money it should be easier to install. I have had 3 other UTVs that I have installed windshields on, all with plastic front windshields, without this much trouble.
Quick Service, April 15, 2019Click here to review this product
(Reviews are subject to approval)
(Reviews are subject to approval)
Questions & Answers
Warning: Cancer & Reproductive Harm For more information, go to www.P65Warnings.ca.gov
