PRP 5 Point Harness w| 2 Inch Shoulder Straps and 3 Inch Lap Belts

A Warning from PRP:

Proper installation and consistent use of the 5 point harness restraint system is critical to your safety in event of accident. To reduce risk of serious injury or death:

• Follow vehicle manufacturers, and PRP Seats instructions and safety messages during installation and use of this product.
• Use all belts provided. Secure lap belt first; low and snug across hips. Sternum strap tight at chest line (min. 4” below neck). Adjust remaining straps per instructions and confirm fitment restrains user & provides safe clearance from wheel, dash, roll cage, etc.
• Inspect all components of the 5 point harness restraint system regularly & replace as indicated by accident, wear or abrasion. Replace no later than 2 years from date on SFI tag, or purchase.
• This competition restraint system intended for UTV or other off-road vehicle-not replacement for FMVSS 209 restraints. Never use with child car seats or boosters.

PRP's unique 5.3x2 harness gives you a different take on comfort and safety. It is equipped with narrower 2 inch shoulder straps with sewn in pads and wider 3 inch lap belts. Metal components are coated black

Probably the best feature with the PRP Seat Harness is the "quick adjust" buckles on the shoulder straps. They are spring assist which makes adjusting the harness much easier especially once they get a little dirty and wet. The next time you go our on a ride, go with added security and piece of mind with the PRP 5 point harness in your rig.

Belt Minders are offered as an option. The purpose of the harness minders are to keep the shoulder straps from spreading too far apart behind your shoulders. You can check out one of the pictures above to get a good illustration.

Features:

• 5 Point Harness, 3″ lap belts with 2″ shoulder belts
• Metal components are coated black
• Easy adjusters
• Sewn in pads
• Removable sternum strap
• Lap belts bolt in
• Shoulder harness and crotch strap can either bolt down or wrap around the roll bar
• Does not include mounting hardware

Optional Harness Override Plug:
If you have a Can Am model, 2015+ Polaris or 2017+ Yamaha UTV, then you're going to want the Dragonfire Harness Override Plug for your machine when installing an aftermarket 4 or 5 point harness for the driver seat. This override clip is designed to trick your machines computer into thinking that you're buckled up, allowing you really hit that gas pedal and go! There is no wiring required, simply plug it in and go play.

Optional Safety Switch Plug:
If you have a Can Am model or 2015+ Polaris UTV, then you're going to want the Dragonfire Safety Switch Plug for your machine when installing an aftermarket 4 or 5 point harness for the driver seat. While the override plug allows you to go full throttle anytime it is inserted, this safety switch stays plugged directly into your wiring. When allows you to limit the max speed of your UTV to 15 MPH or open it full throttle with a simple switch of the button.

Optional Passenger Bracket:
Have a Can-Am Maverick Max? If so, your passenger is going to need the optional passenger bracket above. Since this mounting location for the passenger inner lap belt is so much lower than normal, the aftermarket harnesses can't reach this mount while providing proper fitment. This powder coated, heavy duty carbon steel extension requires no cutting or welding for installation.

Take a few minutes to view the PRP harness installation video: