- CANNOT SHIP TO ALASKA OR HAWAII.
- Must have a winch to use plow system.
Applicability: 2014-20 Yamaha Viking 700 and Viking VI
Itís no secret that winter is starting to roll around with falling temperatures, shorter days, and the end of riding season. When the unavoidable snow starts falling, donít get caught unprepared for the task of snow removal. With the help of this Viking 700 72 Inch Standard Series Plow System, you will make pushing snow a pain-free and potentially enjoyable chore. Before you get your purchase-on, let's ensure this UTV snow plow system meets your demands.
The side by side snow plow comes with everything needed to push even the most extreme levels of snowfall. It's blade measures 72-inches wide and has an impressive 19-inch scoop and is adjustable in height and angles. By allowing for the adjustability, you can move the snow where it needs to go the first time around. Installing the Yamaha plow is a breeze with the model-specific mount, as well as the push tubes quick attach/detach system. Available here at SideBySideStuff.com, the Denali Standard Series Plow system is an excellent option for your snow removal needs.
11 gauge steel leading horizontal supports
Four 7 gauge ribs run the full length of the blade
Three additional 7 gauge horizontal stabilizers support the deepest point of the blade
65 degree attack angle and over center design ensures snow rolls up and is thrown forward
Replaceable 7 gauge, grade 50 steel wear bar
Height and angle adjustable skid feet included
Center mounted plow disperses force of impact to the sturdiest part of the UTV, preventing damage from sudden impact
3 year warranty
Push Tube Specifications:
Impact resistant reinforced pivot assembly
Turn system allows for easy blade positioning in different angles to the left or right - 0 degrees, 12.5 degrees and 25 degrees
Simple detachment systems with the pull of a pin
Structural tube steel cross bar for added lateral rigidity
Plow Mount Specifications:
100% laser cut 1/4 inch steel
Slotted holes allow blade to hug the ground
Optional Rubber Flap Upgrade Specifications:
Stiff rubber flap
Metal hold down bar
Optional Hydroturn Specifications:
Parker hydraulics system with built in relief valve overload protection
Hydraulic system is completely sealed for life
Full radius turn in just 5 seconds while driving
Heavy duty chrome plated 3/4 inch cylinder shafts
Two bolt installation of hydraulic cylinder and pump
No modifications necessary
Wire harness utilizes weatherproof connectors
Backwards compatible with manual turning system
Overload protection of 4,000 lbs. of extension force and 3,500 lbs. of retraction force
Includes 3 year warranty
Optional Push Tube Length:
Choose the push tube length that you need to fit your needs. If you have tracks, then choose the extended push tube to get the snow plow further out, giving you more room for the tracks to work without interference.
Optional Plow Markers:
Snow getting high or need to plow close to vehicles or other items? Get the snow plow markers so you can see exactly where the edge of your blade is, letting you have the most control.
Optional Plow Pulley Fairlead Kit:
The Plow Pulley Fairlead Kit is designed specifically to resist wear from the steep angle that occurs between the fairlead and the plow, extending the life of your winch cable. It can be used with either a steel or synthetic cable and is constructed of black powder coated 7 gauge steel. There are two roller heights for different fairlead heights and angles and you'll receive hardware and instructions.
Standard spool pattern: 3" x 4-7/8"
Wide spool pattern: 3" x 6.67"
Optional Box Ends:
If you want to keep the snow from rolling our the sides of your Denali snow plow, get the box ends right here. These are 1/4" thick steel and include height and angle adjustable skid foot brackets. All the necessary installation instructions and hardware are included also.
Optional Pushtube Lift Kits:
When your UTV has those monster tires or that beastly lift kit on it, using a snow plow in the winter can be a pain. Finding a solution that solves the problem of your pushtube matching the height of your machine can mean complete removal of your tires or lift. With the Denali Pushtube Lift Kit installed, you can keep your tires and lift kit on, while giving Jack Frost the boot! This Pushtube Lift Kit bolts directly to your existing Denali UTV Pushtube giving an easy install, the 2 inch lift will give you 13-15 inches off the ground, and the 4 inch will give you 15-17, all while meeting your snow plow needs!
72 inch plow and hardware, December 12, 2018
Posted By: Brad - verified customer
I've had several ATV plows and another UTV plow. This in it was the easiest to install, and in 2 snowfalls in has performed exceptionally. Thank you!
I have bought and installed several ATV plows and another Yamaha UTV plow and this was the easiest cleanest install of all. Complete and easy to assemble. 2 snowfalls in and has performed exceptionally. Thank you!
Overall this seems to be a great plow. Have only used it for moving gravel and dirt, no snow yet, but works great. Instructions are easy to follow and arrived very quick. Only issue with the instructions was there is only instructions for putting the plow itself together but nothing for actually installing it on my side by side. With a quick youtube video it was easy to do, but having instructions would have been nice.