Honda Pioneer 1000 VersaVent Windshield
2016-21 Honda Pioneer 1000 UTV Scratch Resistant Vented Windshield
(3 out of 5 based on 2 reviews) Read Reviews | Write a Review
SSL Secured
Expert Support
Product Description
Applicability: 2016-21 Honda Pioneer 1000 and Pioneer 1000-5
We bet it didn't take you long to realize rolling without a UTV windshield is about as uncomfortable as it gets. Whether you are headed through the pits or off to tend cattle, no front cab protection results in bugs in your face, skin-burning drive winds, and a severe lack of protection from debris. Don't worry. Side By Side Stuff has you covered with the Pioneer 1000 Versa-Vent Hard Coated Front Windshield by Seizmik.
If you were to look up the words practical and durable in the dictionary, there would be a picture of this side-by-side front windshield right next to them. It's constructed from polycarbonate that is infused on both sides with a durable hard coat. We're talking nearly indestructible and scratch-resistant. The unit includes two fully adjustable vents that allow outstanding climate control that will also assist with defogging. It's super versatile with a low-profile clamping system that enables the use of other accessories and is trailerable up to 65-mph. If this Honda windshield can't meet your demands, nothing will. Get your purchase on.
Features:
PLEASE READ: Upon receipt of your windshield and prior to removing the protective film
View Installation Instructions
View Care Instructions
We bet it didn't take you long to realize rolling without a UTV windshield is about as uncomfortable as it gets. Whether you are headed through the pits or off to tend cattle, no front cab protection results in bugs in your face, skin-burning drive winds, and a severe lack of protection from debris. Don't worry. Side By Side Stuff has you covered with the Pioneer 1000 Versa-Vent Hard Coated Front Windshield by Seizmik.
If you were to look up the words practical and durable in the dictionary, there would be a picture of this side-by-side front windshield right next to them. It's constructed from polycarbonate that is infused on both sides with a durable hard coat. We're talking nearly indestructible and scratch-resistant. The unit includes two fully adjustable vents that allow outstanding climate control that will also assist with defogging. It's super versatile with a low-profile clamping system that enables the use of other accessories and is trailerable up to 65-mph. If this Honda windshield can't meet your demands, nothing will. Get your purchase on.
Features:
- 0.220 inch thick two-sided hard coated polycarbonate provides maximum visibility
- Durable vents made of glass-filled Nylon to last
- Gasket sealed components protect against wind and water intrusion
- Custom designed, strong, glass-filled Nylon clamps are low profile so they do not interfere with other accessories
- Vents have fully adjustable, easy-to-use louver for variable airflow
- Incoming air can be directed at the inside window surface to create a defog mode to help prevent fogging
- Easy to turn knobs make installation a breeze
- Compatible with Seizmik accessories such as mirrors
- Works with most roofs (requires factory header panel for windshield installation)
- Trailerable to 65mph
PLEASE READ: Upon receipt of your windshield and prior to removing the protective film
- Inspect for any damages, including scratches protruding through the protective film
- Ensure product satisfaction
- Confirm correct fitment



Customer Reviews
2016-21 Honda Pioneer 1000 UTV Scratch Resistant Vented Windshield
Product Reviews


Posted By: Todd Wyant
5 people found this review helpful
Purchased for a 2021 Honda Pioneer 1000-5. he Seizmik, versa vent windshield looks pretty awesome. Other than that I wouldn't recommend it. The windshield installs with 6 p-clamps, the clamp seem to fit up well but don't allow for much adjustment. It took several adjustments to allow the hood to open. After I got the windshield fully installed I did a walkaround and noticed the windshield contacts the ROPS along the top and down the sides, which I wasn't key on. Then I started the engine. The windshield has enough flex to allow the center of the windshield to move somewhere between 1/8-1/4". The flex then causes the sides that contact the ROPS to rattle. When I took it for a test drive the windshield rattle was louder than the engine. I contacted Seizmik they said they have never had this issue. They sent some edgelok bulb seal. Because of the ROPS and clamping the bulb seal can only be applied to a few small locations. This did eliminate the noise but look really cheesy and likely wont hold up long. The windshield still vibrates and is really distracting when driving. I'm looking for options to return the windshield.
5 people found this review helpful
Purchased for a 2021 Honda Pioneer 1000-5. he Seizmik, versa vent windshield looks pretty awesome. Other than that I wouldn't recommend it. The windshield installs with 6 p-clamps, the clamp seem to fit up well but don't allow for much adjustment. It took several adjustments to allow the hood to open. After I got the windshield fully installed I did a walkaround and noticed the windshield contacts the ROPS along the top and down the sides, which I wasn't key on. Then I started the engine. The windshield has enough flex to allow the center of the windshield to move somewhere between 1/8-1/4". The flex then causes the sides that contact the ROPS to rattle. When I took it for a test drive the windshield rattle was louder than the engine. I contacted Seizmik they said they have never had this issue. They sent some edgelok bulb seal. Because of the ROPS and clamping the bulb seal can only be applied to a few small locations. This did eliminate the noise but look really cheesy and likely wont hold up long. The windshield still vibrates and is really distracting when driving. I'm looking for options to return the windshield.
Click here to review this product
(Reviews are subject to approval)
(Reviews are subject to approval)