66" Pro Series Plow for Polaris Ranger

NOTES:
- CANNOT SHIP TO ALASKA OR HAWAII.
- Must have a winch to use plow system.
- Plow mount MA11752 does NOT work with the Ranger 1000 base model and also requires the Polaris Front Brush Guard.


Applicability: 2005-23 Polaris Ranger (See options above)


There is a lot of fun to be had in a rig surrounded by snowy terrain. You can hook up sleds, do donuts, you can even take it gliding down a hill! Unfortunately, first, you're going to have to put your buggy to work with the Ranger 66 Inch Pro Series Plow System by Denali. Luckily for you, the kit includes a pull-pin removal system that will have you dancing the snowdrifts before you know it. Let's see what else makes up this UTV snow plow system.

The Polaris snow plow system is made tough-as-nails with a quality performance capacity. Each component is forged from steel, while the blade is sandblasted and powder-coated with corrosion-resistant primer and top-coat. They've also incorporated both height and angle adjustability with movable skid feet, allowing the user to manipulate the side by side plow to accommodate the environment. As stated before, the Ranger snow plow attachment conveniently removes from your rig. So, once your tasks are completed, you can get your ride on, winter style!


Blade Specifications:

• U.S.A. made
  
• County-style blade with curved design made of 12 gauge steel
  
• Impact resistant reinforcement system disperses force of impact to the sturdiest part of the UTV, preventing damage from sudden impact
  
• Includes edge stiffeners and stabilizer bar
  
• Sand blasted, powder coated with epoxy primer and TGIC polyester top coat for corrosion protection, UV resistance and durability
  
• Available in black, red or yellow
  
• High strength, high yield 3/16 inch thick grade 50 steel wear bar
  
• Angle blade is 23 inches on the tallest side and 16 inches on the shortest side
  
• Rubber flap stabilizer bar with upgraded (stiffer) rubber flap
  
• Plow markers included
  
• Height and angle adjustable premium steel skid feet
  
• Includes 3 year warranty on the plow blade against manufacturer defects

Push Tube Specifications:

• Impact resistant reinforced pivot assembly
  
• Turn system allows for easy blade positioning in different angles to the left or right - 0 degrees, 12.5 degrees and 25 degrees
  
• Simple detachment systems with the pull of a pin
  
• Structural tube steel cross bar for added lateral rigidity

Plow Mount Specifications:

• Front mount
• 100% laser cut 1/4 inch steel
  
• Slotted holes allow blade to hug the ground

Optional Hydroturn Specifications:

• Parker hydraulics system with built in relief valve overload protection
  
• Hydraulic system is completely sealed for life
  
• Full radius turn in just 5 seconds while driving
  
• Heavy duty chrome plated 3/4 inch cylinder shafts
  
• Two bolt installation of hydraulic cylinder and pump
  
• No modifications necessary
  
• Wire harness utilizes weatherproof connectors
  
• Backwards compatible with manual turning system
  
• Overload protection of 4,000 lbs. of extension force and 3,500 lbs. of retraction force
  
• Includes 3 year warranty

Optional Push Tube Length:
Choose the push tube length that you need to fit your needs. If you have tracks, then choose the extended push tube to get the snow plow further out, giving you more room for the tracks to work without interference.


Optional Plow Pulley Fairlead Kit:
The Plow Pulley Fairlead Kit is designed specifically to resist wear from the steep angle that occurs between the fairlead and the plow, extending the life of your winch cable. It can be used with either a steel or synthetic cable and is constructed of black powder coated 7 gauge steel. There are two roller heights for different fairlead heights and angles and you'll receive hardware and instructions.

• Standard spool pattern: 3" x 4-7/8"
• Wide spool pattern: 3" x 6.67"

Optional Additional Wearbar:
If you want to keep the edges of your snow plow in top shape the Denali Polyurethane Wearbar is the choice for you. Not only is the wearbar reversible for longer use, but the polyurethane construction outlasts rubber and steel. The wearbar won't cause damage to brick, concrete, curbs and more! The wearbar is the perfect choice to increase productivity and reduce equipment wear.


Optional Pushtube Lift Kits:
When your UTV has those monster tires or that beastly lift kit on it, using a snow plow in the winter can be a pain. Finding a solution that solves the problem of your pushtube matching the height of your machine can mean complete removal of your tires or lift. With the Denali Pushtube Lift Kit installed, you can keep your tires and lift kit on, while giving Jack Frost the boot! This Pushtube Lift Kit bolts directly to your existing Denali UTV Pushtube giving an easy install, the 2 inch lift will give you 13-15 inches off the ground, and the 4 inch will give you 15-17, all while meeting your snow plow needs!