Full Cab Enclosure for Polaris RZR:
(3.5 out of 5 based on 10 reviews) Read Reviews | Write a Review
SSL Secure and
Privacy Guaranteed
SSL Secured
Expert Support
Product Description
****THIS ITEM IS MADE TO ORDER AND LEAD TIMES MAY VARY****
NOTES:
- Not recommended to transport on open trailer.
- To be used with your existing full windshield.
- Does not include windshield or upper door nets shown in some photos above.
Applicability: 2008-14 Polaris RZR 800 / RZR S 800 / RZR 800 XC / RZR XP 900 and 2012-20 Polaris RZR 570 / RZR S 570
Already have a windshield on your Polaris RZR? Good! You're set-up to apply this Full Cab Enclosure with Hinged Doors to your RZR XP 900 or Polaris RZR S (also fits RZR 800 and 570). Soft, tinted windows make bright barable and mayhem doable. With a full cab enclosure, you’ll have the pedal to the metal while your non enclosure buddies are sitting by the fire doing……..well nothing.
DOORS: The RZR PR-PRODUCTS doors convert to half doors is minutes! Quick and easy removable top section. Tough Tubular metal frame design with copper inserted hinges for durability! Double lined lower material section, Tinted soft windows. Easy open and close latch system with doors hinged at the front to open like a car door.
TOP: This is not just an ordinary piece of material stretched out! We have incorporated metal tubular side roll bar supports for extra strength and also creates an upper door jam needed for door/cab enclosure.
REAR WINDOW ASSEMBLY: Attaches to our soft top roof to create a full roof/rear enclosure.
Note: See options for available warm weather upper door nets.
NOTES:
- Not recommended to transport on open trailer.
- To be used with your existing full windshield.
- Does not include windshield or upper door nets shown in some photos above.
Applicability: 2008-14 Polaris RZR 800 / RZR S 800 / RZR 800 XC / RZR XP 900 and 2012-20 Polaris RZR 570 / RZR S 570
Already have a windshield on your Polaris RZR? Good! You're set-up to apply this Full Cab Enclosure with Hinged Doors to your RZR XP 900 or Polaris RZR S (also fits RZR 800 and 570). Soft, tinted windows make bright barable and mayhem doable. With a full cab enclosure, you’ll have the pedal to the metal while your non enclosure buddies are sitting by the fire doing……..well nothing.
DOORS: The RZR PR-PRODUCTS doors convert to half doors is minutes! Quick and easy removable top section. Tough Tubular metal frame design with copper inserted hinges for durability! Double lined lower material section, Tinted soft windows. Easy open and close latch system with doors hinged at the front to open like a car door.
TOP: This is not just an ordinary piece of material stretched out! We have incorporated metal tubular side roll bar supports for extra strength and also creates an upper door jam needed for door/cab enclosure.
REAR WINDOW ASSEMBLY: Attaches to our soft top roof to create a full roof/rear enclosure.
Note: See options for available warm weather upper door nets.
Customer Reviews
Product Reviews
Rzr full cab, January 15, 2021 Full Cab Enclose, October 5, 2020Posted By: Kevin - verified customer
1 people found this review helpful
Fit is ok. Velcro adhesive comes off the Velcro and sticks to the roll bar. I was unable to remove and had to buy higher quality Velcro and stick it to the remaining adhesive. There is no way to connect the bottom of the rear window to the cab so I will need to have someone sew in Velcro otherwise the wind blows right through it. The window frame is conduit and painted only where it's cut and bent. Seems that the extra 5 minutes could have been taken to paint the rest of the conduit. Overall it's not a terrible product, but for $800 I honestly expected higher quality.
1 people found this review helpful
Fit is ok. Velcro adhesive comes off the Velcro and sticks to the roll bar. I was unable to remove and had to buy higher quality Velcro and stick it to the remaining adhesive. There is no way to connect the bottom of the rear window to the cab so I will need to have someone sew in Velcro otherwise the wind blows right through it. The window frame is conduit and painted only where it's cut and bent. Seems that the extra 5 minutes could have been taken to paint the rest of the conduit. Overall it's not a terrible product, but for $800 I honestly expected higher quality.
enclosure for 800 s, October 2, 2020 Rzr800 soft cab, May 28, 2020Posted By: Rod Silcock - verified customer
2 people found this review helpful
3pages of brief instruction were vague. I am doubting the easy removal of the door tops.the roof top does not fit!! I am needing to add a 2 Velcro to the left side so the top can be secured around the door opening header.
2 people found this review helpful
3pages of brief instruction were vague. I am doubting the easy removal of the door tops.the roof top does not fit!! I am needing to add a 2 Velcro to the left side so the top can be secured around the door opening header.
Everything fit great! Good quality, October 29, 2019 Greatly extends riding season , November 8, 2018 Poor Fit, October 30, 2015
Still waiting for correct parts, July 3, 2015Posted By: WEEKENDER SPORTS - verified customer
6 people found this review helpful
The product was not as advertised. The kit was missing parts, and a month after ordering online we are yet to complete this job. Waited for two weeks for the original kit. Now waiting for correct parts.
6 people found this review helpful
The product was not as advertised. The kit was missing parts, and a month after ordering online we are yet to complete this job. Waited for two weeks for the original kit. Now waiting for correct parts.
Great cab, May 8, 2015Posted By: R D Langerud
10 people found this review helpful
This is one nice cab. Installed it today in just over an hour. Great fit and made strong. I think it looks great also due to the framed, hinged doors. Some of the cabs available today look like a tarp with zippers covering your expensive machine. This one is made to fit the machine you have. If you want a cab enclosure that's easy on and easy off, this is the one!
10 people found this review helpful
This is one nice cab. Installed it today in just over an hour. Great fit and made strong. I think it looks great also due to the framed, hinged doors. Some of the cabs available today look like a tarp with zippers covering your expensive machine. This one is made to fit the machine you have. If you want a cab enclosure that's easy on and easy off, this is the one!
Works for me, October 14, 2014Posted By: John Hoaby
7 people found this review helpful
Purchased this cover to make driving in winter a little warmer. The enclosure fit as expected. There are a few gaps here and there but overall it gets me out of the weather. It appears to me that the top could be a little wider, as when it's installed, it's hard to get all the velcro to match up for both sides.
7 people found this review helpful
Purchased this cover to make driving in winter a little warmer. The enclosure fit as expected. There are a few gaps here and there but overall it gets me out of the weather. It appears to me that the top could be a little wider, as when it's installed, it's hard to get all the velcro to match up for both sides.
Click here to review this product
(Reviews are subject to approval)
(Reviews are subject to approval)
