CF Moto CForce 500 Rival Front Bumper
(5 out of 5 based on 1 reviews) Read Reviews | Write a Review
SSL Secure and
Privacy Guaranteed
SSL Secured
Expert Support
Product Description
NOTES:
- CANNOT ship to Alaska, Hawaii or Canada.
- Installation requires use of OEM or factory hardware.
Applicability: 2016-21 CFMOTO CForce 400 / CForce 400 2 UP / CForce 500 / CForce 500 EPS / CForce 500 S / CForce 500 2 UP
Do you consider your quad a prized possession? After all, they are one of the most versatile vehicles on the planet, capable of offroad fun and tackling chores! You've got to protect your asset friends because your front-end takes a beating. That can be done with the CForce 500S Front Bumper by Rival.
The aftermarket accessory is built for battle from tubular steel and powder-coated for increased longevity and durability. It's a full coverage ATV bumper, offering protection to the entire front-end along with the headlights and rack location. There's no drilling or other intrusive machine modifications needed, simply bolt-on and ride. Order yours today by shopping CForce 400 protection parts at SideBySideStuff.com.
Features:
- CANNOT ship to Alaska, Hawaii or Canada.
- Installation requires use of OEM or factory hardware.
Applicability: 2016-21 CFMOTO CForce 400 / CForce 400 2 UP / CForce 500 / CForce 500 EPS / CForce 500 S / CForce 500 2 UP
Do you consider your quad a prized possession? After all, they are one of the most versatile vehicles on the planet, capable of offroad fun and tackling chores! You've got to protect your asset friends because your front-end takes a beating. That can be done with the CForce 500S Front Bumper by Rival.
The aftermarket accessory is built for battle from tubular steel and powder-coated for increased longevity and durability. It's a full coverage ATV bumper, offering protection to the entire front-end along with the headlights and rack location. There's no drilling or other intrusive machine modifications needed, simply bolt-on and ride. Order yours today by shopping CForce 400 protection parts at SideBySideStuff.com.
Features:
- 38mm x 1.5mm tubular steel
- Powder coated finish
- Bolt on design, no drilling necessary
- Multiple frame mounting points for added strength
- Headlight protection
- Full coverage, heavy-duty look
- Designed for farm, ranch, forestry or racing applications
- Includes all mounting instructions
Warning: Cancer and Reproductive Harm For more information, go to www.P65Warnings.ca.govCustomer Reviews
Product Reviews
Nice product , June 11, 2020Posted By: Roger - verified customer
4 people found this review helpful
Over all this is a nice brush guard, I actually have purchased both the front and rear from Side by Side who has good customer service with a little issue I had with the front number. The only flaw I can see with the front bumper is that you have to remove the lower front skid plate to install the bumper which leaves an area around 8" inches that a large object can get through and possibly damaged the front 4 wheel drive housing. However, I bought a piece of HDPE that was 12x12 and was able to fabricate a skid plate with tools on hand heat gun and cut off tool to cut it to fix this issue. Maybe Rival should look at this issue and come up with a solution to be added to the bumper kit? Looks and durability are great. I have gotten a lot of compliments on the look of the machine, even the dealer I bought my 2020 CF 500 from said they were going to start installing these on some of their new machines. Packaging for shipment was not great on the front bumper but that is Rival's fault and Side by Side did come up with a solution that was very fair due to some slight damage that occurred during shipping in which I did not have that issue with the rest bumper. So that being said make sure you inspect the product throughly before installing as they will not exchange or refund the product if it has been installed but again customer service was great at Side by Side Stuff. So to sum it up pull the trigger and buy these to protect your investment and give it a more aggressive look.
4 people found this review helpful
Over all this is a nice brush guard, I actually have purchased both the front and rear from Side by Side who has good customer service with a little issue I had with the front number. The only flaw I can see with the front bumper is that you have to remove the lower front skid plate to install the bumper which leaves an area around 8" inches that a large object can get through and possibly damaged the front 4 wheel drive housing. However, I bought a piece of HDPE that was 12x12 and was able to fabricate a skid plate with tools on hand heat gun and cut off tool to cut it to fix this issue. Maybe Rival should look at this issue and come up with a solution to be added to the bumper kit? Looks and durability are great. I have gotten a lot of compliments on the look of the machine, even the dealer I bought my 2020 CF 500 from said they were going to start installing these on some of their new machines. Packaging for shipment was not great on the front bumper but that is Rival's fault and Side by Side did come up with a solution that was very fair due to some slight damage that occurred during shipping in which I did not have that issue with the rest bumper. So that being said make sure you inspect the product throughly before installing as they will not exchange or refund the product if it has been installed but again customer service was great at Side by Side Stuff. So to sum it up pull the trigger and buy these to protect your investment and give it a more aggressive look.
Click here to review this product
(Reviews are subject to approval)
(Reviews are subject to approval)
