- CANNOT SHIP TO ALASKA OR HAWAII.
- Requires two (2) additional 3/8" holes to be drilled into the plow mount (template included).
- Must have a winch to use plow system.
- Machines with skid plates 13-15 inches off of the ground come with a 2 Inch Pushtube Lift Kit, so another kit is not required.
Applicability: 2016-21 Polaris General 1000 and General 4 1000
Towards the colder parts of the year, there are some complicated things that are going to get in the way of you and your Polaris General 1000. If you are one that spends their days working outside, snow can be one of many wintery obstacles that can slow you down. Turn your UTV into an unstoppable plowing machine and get your work done that much faster with the Denali 66 Inch Standard Series Plow System. Those days of shoveling the driveway and other paths around your house will be gone with one of these bad boys!
Some of the features of this plow system include the 65-degree attack angle that allows you to plow that snow wherever you need with center mounting. The mounting evenly distributes force of impact on the sturdiest part of the machine to prevent damage. With the push tube you will get an impact resistant reinforced pivot assembly with positioning angles from 0 to 25 degrees to plow that snow whichever way you desire. To ensure a sturdy hold to your machine, this kit also includes a 1/4 inch laser cut steel mount with slotted holes to allow the blade to hug the ground. From the wear bar to the skid feet and options that include plow markers and hydro turn, no other plow will compare to the Denali 66 Inch Standard Series Plow System, so get yours today!
11 gauge steel leading horizontal supports
Four 7 gauge ribs run the full length of the blade
Three additional 7 gauge horizontal stabilizers support the deepest point of the blade
65 degree attack angle and over center design ensures snow rolls up and is thrown forward
Replaceable 7 gauge, grade 50 steel wear bar
Height and angle adjustable skid feet included
Center mounted plow disperses force of impact to the sturdiest part of the UTV, preventing damage from sudden impact
3 year warranty
Push Tube Specifications:
Impact resistant reinforced pivot assembly
Turn system allows for easy blade positioning in different angles to the left or right - 0 degrees, 12.5 degrees and 25 degrees
Simple detachment systems with the pull of a pin
Structural tube steel cross bar for added lateral rigidity
Plow Mount Specifications:
100% laser cut 1/4 inch steel
Slotted holes allow blade to hug the ground
Optional Rubber Flap Upgrade Specifications:
Stiff rubber flap
Metal hold down bar
Optional Hydroturn Specifications:
Parker hydraulics system with built in relief valve overload protection
Hydraulic system is completely sealed for life
Full radius turn in just 5 seconds while driving
Heavy duty chrome plated 3/4 inch cylinder shafts
Two bolt installation of hydraulic cylinder and pump
No modifications necessary
Wire harness utilizes weatherproof connectors
Backwards compatible with manual turning system
Overload protection of 4,000 lbs. of extension force and 3,500 lbs. of retraction force
Includes 3 year warranty
Optional Extended Length Push Tube:
Choose the push tube length that you need to fit your needs. If you have tracks, then choose the extended push tube to get the snow plow further out, giving you more room for the tracks to work without interference.
Optional Plow Markers:
Snow getting high or need to plow close to vehicles or other items? Get the snow plow markers so you can see exactly where the edge of your blade is, letting you have the most control.
Optional Plow Pulley Fairlead Kit:
The Snow Plow Pulley Fairlead Kit is designed specifically to resist wear from the steep angle that occurs between the fairlead and the plow, extending the life of your winch cable. It can be used with either a steel or synthetic cable and is constructed of black powder coated 7 gauge steel. There are two roller heights for different fairlead heights and angles and you'll receive hardware and instructions.
Standard spool pattern: 3" x 4-7/8"
Wide spool pattern: 3" x 6.67"
Optional Box Ends:
If you want to keep the snow from rolling our the sides of your Denali snow plow, get the box ends right here. These are 1/4" thick steel and include height and andle adjustable skid foot brackets. All the necessary installation instructions and hardware are included also.
Optional Additional Wearbar:
If you want to keep the edges of your snow plow in top shape the Denali Polyurethane Wearbar is the choice for you. Not only is the wearbar reversible for longer use, but the polyurethane construction outlasts rubber and steel. The wearbar won't cause damage to brick, concrete, curbs and more! The wearbar is the perfect choice to increase productivity and reduce equipment wear.
Optional Pushtube Lift Kits:
When your UTV has those monster tires or that beastly lift kit on it, using a snow plow in the winter can be a pain. Finding a solution that solves the problem of your pushtube matching the height of your machine can mean complete removal of your tires or lift. With the Denali Pushtube Lift Kit installed, you can keep your tires and lift kit on, while giving Jack Frost the boot! This Pushtube Lift Kit bolts directly to your existing Denali UTV Pushtube giving an easy install, the 2 inch lift will give you 13-15 inches off the ground, and the 4 inch will give you 15-17, all while meeting your snow plow needs!
Snow plow, February 18, 2017
Posted By: Kelly mcgreal - verified customer 1 people found this review helpful
Built to last and extra tough for the deep snow. Would and have recommended to friends and family.