- Must have a winch to use plow system.
- Pioneer 700 and Pioneer 1000 models will NOT work with KFI winch mounts or Warn winch mounts.
2014-19 Honda Pioneer 700 and Pioneer 700 4
2015-19 Honda Pioneer 500
2016-19 Honda Pioneer 1000 and Pioneer 1000-5
If you live in an area where snow fall is a constant hindrance to you being able to get out of your house or driveway then SideBySideStuff.com has just what you need. To help move all that snow so you can get out of the house and on to bigger and better things, you’re going to need something heavy duty. Ladies and gentleman, introducing the Denali 72” Pro Series Snow Plow for the Honda Pioneer 500, Pioneer 700 or Pioneer 1000.
The Denali snow plow is a great addition to your machine and garage. It’s designed to make snow removal a completely painless process with its easy model specific mounting points. The Denali plow measures 72” with a high side measurement of 23” and a low side height of 16” tall; this means that your machine is going to be able to move some serious amounts of snow at previously unmatched speeds. Also available are countless accessories to the plow system to further assist you in your snow removal escapades. From a hydraulic blade angle adjustment tool to even a plow roller, whatever you could need the Denali plow has. Be sure to check out the technical information below before purchasing to ensure proper fitment and if you have any questions about this plow or what it fits be sure to give us a call and we will be more than happy to help answer any of your questions.
County-style blade with curved design made of 12 gauge steel
Impact resistant reinforcement system disperses force of impact to the sturdiest part of the UTV, preventing damage from sudden impact
Includes edge stiffeners and stabilizer bar
Sand blasted, powder coated with epoxy primer and TGIC polyester top coat for corrosion protection, UV resistance and durability
Available in black, red or yellow
High strength, high yield 3/16 inch thick grade 50 steel wear bar
Angle blade is 23 inches on the tallest side and 16 inches on the shortest side
Rubber flap stabilizer bar with upgraded (stiffer) rubber flap
Plow markers included
Height and angle adjustable premium steel skid feet
Includes 3 year warranty on the plow blade against manufacturer defects
Push Tube Specifications:
Impact resistant reinforced pivot assembly
Turn system allows for easy blade positioning in different angles to the left or right - 0 degrees. 12.5 degrees and 25 degrees
Simple detachment systems with the pull of a pin
Structural tube steel cross bar for added lateral rigidity
Plow Mount Specifications:
100% laser cut 1/4 inch steel
Slotted holes allow blade to hug the ground
Optional Hydroturn Specifications:
Parker hydraulics system with built in relief valve overload protection
Hydraulic system is completely sealed for life
Full radius turn in just 5 seconds while driving
Heavy duty chrome plated 3/4 inch cylinder shafts
Two bolt installation of hydraulic cylinder and pump
No modifications necessary
Wire harness utilizes weatherproof connectors
Backwards compatible with manual turning system
Overload protection of 4,000 lbs. of extension force and 3,500 lbs. of retraction force
Includes 3 year warranty
Optional Push Tube Length:
Choose the push tube length that you need to fit your needs. If you have tracks, then choose the extended push tube to get the snow plow further out, giving you more room for the tracks to work without interference.
Optional Plow Pulley Fairlead Kit:
The Plow Pulley Fairlead Kit is designed specifically to resist wear from the steep angle that occurs between the fairlead and the plow, extending the life of your winch cable. It can be used with either a steel or synthetic cable and is constructed of black powder coated 7 gauge steel. There are two roller heights for different fairlead heights and angles and you'll receive hardware and instructions.
Standard spool pattern: 3" x 4-7/8"
Wide spool pattern: 3" x 6.67"
Optional Pushtube Lift Kits:
When your UTV has those monster tires or that beastly lift kit on it, using a snow plow in the winter can be a pain. Finding a solution that solves the problem of your pushtube matching the height of your machine can mean complete removal of your tires or lift. With the Denali Pushtube Lift Kit installed, you can keep your tires and lift kit on, while giving Jack Frost the boot! This Pushtube Lift Kit bolts directly to your existing Denali UTV Pushtube giving an easy install, the 2 inch lift will give you 13-15 inches off the ground, and the 4 inch will give you 15-17, all while meeting your snow plow needs!