Denali 72 Inch Pro Series Snow Plow System - 2009-20 Kawasaki Mule 4000 | 4010 | Pro-FX | Pro-DX

NOTES:
- CANNOT SHIP TO ALASKA OR HAWAII.
- Must have a winch to use plow system.


Applicability: 2009-20 Kawasaki Mule (See options above)


When the snow starts falling be prepared to move it out of your drive and into a pile to melt away. Here at SideBySideStuff.com we offer products like this Denali Pro Series Plow System to help with these exact situations. This particular system is designed to be model specific so it eliminates the need to custom fabricate or alter the plow mount to fit on your Kawasaki Mule Pro-FXT, Mule 4000 or other Mule models.

The kit comes with everything needed from the model specific plow mount to the quick attach push tube system and its impressive snow blade. Unlike some snow plow kits on the market the Denali Series plows have quite a few features standard and even more add-ons to make your life much easier. Things like a 6 position blade angle adjustment push tube and even an adjustable high strength grade 50 steel wear bar. If you looking to make your machine function even better than that you need to take a look at the add-ons that are available for the kit. Things like the plow roller, hydroturns, or even an extended push tube. Check out those options below as well as the videos to see just how well the Denali Series Snow Plows work!

Blade Specifications:

• U.S.A. made
  
• County-style blade with curved design made of 12 gauge steel
  
• Impact resistant reinforcement system disperses force of impact to the sturdiest part of the UTV, preventing damage from sudden impact
  
• Includes edge stiffeners and stabilizer bar
  
• Sand blasted, powder coated with epoxy primer and TGIC polyester top coat for corrosion protection, UV resistance and durability
  
• Available in black, red or yellow
  
• High strength, high yield 3/16 inch thick grade 50 steel wear bar
  
• Angle blade is 23 inches on the tallest side and 16 inches on the shortest side
  
• Rubber flap stabilizer bar with upgraded (stiffer) rubber flap
  
• Plow markers included
  
• Height and angle adjustable premium steel skid feet
  
• Includes 3 year warranty on the plow blade against manufacturer defects

Push Tube Specifications:

• Impact resistant reinforced pivot assembly
  
• Turn system allows for easy blade positioning in different angles to the left or right - 0 degrees. 12.5 degrees and 25 degrees
  
• Simple detachment systems with the pull of a pin
  
• Structural tube steel cross bar for added lateral rigidity

Plow Mount Specifications:

• Front mount
• 100% laser cut 1/4 inch steel
  
• Slotted holes allow blade to hug the ground

Optional Hydroturn Specifications:

• Parker hydraulics system with built in relief valve overload protection
  
• Hydraulic system is completely sealed for life
  
• Full radius turn in just 5 seconds while driving
  
• Heavy duty chrome plated 3/4 inch cylinder shafts
  
• Two bolt installation of hydraulic cylinder and pump
  
• No modifications necessary
  
• Wire harness utilizes weatherproof connectors
  
• Backwards compatible with manual turning system
  
• Overload protection of 4,000 lbs. of extension force and 3,500 lbs. of retraction force
  
• Includes 3 year warranty

Optional Push Tube Length:
Choose the push tube length that you need to fit your needs. If you have tracks, then choose the extended push tube to get the snow plow further out, giving you more room for the tracks to work without interference.

Optional Plow Pulley Fairlead Kit:
The Plow Pulley Fairlead Kit is designed specifically to resist wear from the steep angle that occurs between the fairlead and the plow, extending the life of your winch cable. It can be used with either a steel or synthetic cable and is constructed of black powder coated 7 gauge steel. There are two roller heights for different fairlead heights and angles and you'll receive hardware and instructions.

• Standard spool pattern: 3" x 4-7/8"
• Wide spool pattern: 3" x 6.67"

Optional Pushtube Lift Kits:

When your UTV has those monster tires or that beastly lift kit on it, using a snow plow in the winter can be a pain. Finding a solution that solves the problem of your pushtube matching the height of your machine can mean complete removal of your tires or lift. With the Denali Pushtube Lift Kit installed, you can keep your tires and lift kit on, while giving Jack Frost the boot! This Pushtube Lift Kit bolts directly to your existing Denali UTV Pushtube giving an easy install, the 2 inch lift will give you 13-15 inches off the ground, and the 4 inch will give you 15-17, all while meeting your snow plow needs!