- CANNOT SHIP TO ALASKA OR HAWAII.
- Must have a winch to use plow system.
2008-13 Kawasaki Teryx 750
2012-22 Kawasaki Teryx4
2014-22 Kawasaki Teryx 800 2-seater
The temperatures are dropping, the leaves have fallen and winter is moving in. As with every winter the snow is not all that far behind and when the snow starts falling dont get caught by surprise. Be prepared for it with this Denali Pro Series Snow Plow for your Kawasaki Teryx that we have available here at SideBySideStuff.com.
By adding the Denali plow system to your Teryx 800, Teryx4 or Teryx 750 you will help expedite the dreaded task of snow removal around the house. The Pro Series blade measures 72 wide and features an angled blade with an impressive 23 tall side and 17 on the short side. The plow is built with quality in mind. It features a high quality powder coated finish over the steel constructed and reinforced snow blade. Available here at Side By Side Stuff the Denali series snow blade is a great option for you and your Teryx.
County-style blade with curved design made of 12 gauge steel
Impact resistant reinforcement system disperses force of impact to the sturdiest part of the UTV, preventing damage from sudden impact
Includes edge stiffeners and stabilizer bar
Sand blasted, powder coated with epoxy primer and TGIC polyester top coat for corrosion protection, UV resistance and durability
Available in black, red or yellow
High strength, high yield 3/16 inch thick grade 50 steel wear bar
Angle blade is 23 inches on the tallest side and 16 inches on the shortest side
Rubber flap stabilizer bar with upgraded (stiffer) rubber flap
Plow markers included
Height and angle adjustable premium steel skid feet
Includes 3 year warranty on the plow blade against manufacturer defects
Push Tube Specifications:
Impact resistant reinforced pivot assembly
Turn system allows for easy blade positioning in different angles to the left or right - 0 degrees, 12.5 degrees and 25 degrees
Simple detachment systems with the pull of a pin
Structural tube steel cross bar for added lateral rigidity
Plow Mount Specifications:
100% laser cut 1/4 inch steel
Slotted holes allow blade to hug the ground
Optional Hydroturn Specifications:
Parker hydraulics system with built in relief valve overload protection
Hydraulic system is completely sealed for life
Full radius turn in just 5 seconds while driving
Heavy duty chrome plated 3/4 inch cylinder shafts
Two bolt installation of hydraulic cylinder and pump
No modifications necessary
Wire harness utilizes weatherproof connectors
Backwards compatible with manual turning system
Overload protection of 4,000 lbs. of extension force and 3,500 lbs. of retraction force
Includes 3 year warranty
Optional Push Tube Length:
Choose the push tube length that you need to fit your needs. If you have tracks, then choose the extended push tube to get the snow plow further out, giving you more room for the tracks to work without interference.
Optional Plow Pulley Fairlead Kit:
The Plow Pulley Fairlead Kit is designed specifically to resist wear from the steep angle that occurs between the fairlead and the plow, extending the life of your winch cable. It can be used with either a steel or synthetic cable and is constructed of black powder coated 7 gauge steel. There are two roller heights for different fairlead heights and angles and you'll receive hardware and instructions.
Standard spool pattern: 3" x 4-7/8"
Wide spool pattern: 3" x 6.67"
Optional Pushtube Lift Kits:
When your UTV has those monster tires or that beastly lift kit on it, using a snow plow in the winter can be a pain. Finding a solution that solves the problem of your pushtube matching the height of your machine can mean complete removal of your tires or lift. With the Denali Pushtube Lift Kit installed, you can keep your tires and lift kit on, while giving Jack Frost the boot! This Pushtube Lift Kit bolts directly to your existing Denali UTV Pushtube giving an easy install, the 2 inch lift will give you 13-15 inches off the ground, and the 4 inch will give you 15-17, all while meeting your snow plow needs!
Easy assembly Bracket Hangs a little low, January 24, 2017
Posted By: Scott - verified customer 6 people found this review helpful
I would give it 5 stars if the mounting bracket didn't hang so low. The Denali plow works great. It is easy to install and moves snow with my Teryx 800 with ease. It took one evening after work to get it mounted with a simultaneous KFI winch install. I will probably remove the mounting bracket during the summer because it hangs a little too low in my opinion. If you are shopping around and somewhat handy there is no need to keep looking, buy this plow.