- CANNOT SHIP TO ALASKA OR HAWAII.
- Must have a winch to use plow system.
- Most holes on 2" receivers are 5/8" in diameter. Depending on the hole size in your hitch, drilling larger holes or using different hitch pins may be necessary.
- The silver, quick release pins, are NOT included with the purchase of the plow mount plate.
Applicability: Fits all Kubota RTV's with a 2" front receiver hitch installed
No one in their right mind enjoys shoveling snow, and with the Kubota RTV 72 Inch Pro Series Snow Plow System, you don't have to. All you need to get this outfit is a two-inch receiver hitch and a winch, and you are good to go. This side-by-side snowplow kit is ideal for those who want a highway snowplow performance without the inconvenience of having a highway snowplow.
The UTV snowplow attaches to the rig using a push tube and model-specific mount. The off-road accessory works great on several terrain surfaces between the adjustable blade and pivoting push tube. Then, factor in the durable corrosion-resistant steel construction. You don't have to worry about the kit getting tanked and going down for the count.
This Kubota snowplow comes standard with the blade, push tube, and mount. Still, several upgrades are available if you want all the fixings. Simply add a pully, extend the push tube length and a hydroturn, or grab an extra wear bar, and you'll have a sxs snowplow that will have you the guy to know on the block.
County-style blade with curved design made of 12 gauge steel
Impact resistant reinforcement system disperses force of impact to the sturdiest part of the UTV, preventing damage from sudden impact
Includes edge stiffeners and stabilizer bar
Sand blasted, powder coated with epoxy primer and TGIC polyester top coat for corrosion protection, UV resistance and durability
Available in black, red or yellow
High strength, high yield 3/16 inch thick grade 50 steel wear bar
Angle blade is 23 inches on the tallest side and 16 inches on the shortest side
Rubber flap stabilizer bar with upgraded (stiffer) rubber flap
Plow markers included
Height and angle adjustable premium steel skid feet
Includes 3 year warranty on the plow blade against manufacturer defects
Push Tube Specifications:
Impact resistant reinforced pivot assembly
Turn system allows for easy blade positioning in different angles to the left or right - 0 degrees, 12.5 degrees and 25 degrees
Simple detachment systems with the pull of a pin
Structural tube steel cross bar for added lateral rigidity
Plow Mount Specifications:
100% laser cut 1/4 inch steel
Slotted holes allow blade to hug the ground
Optional Hydroturn Specifications:
Parker hydraulics system with built in relief valve overload protection
Hydraulic system is completely sealed for life
Full radius turn in just 5 seconds while driving
Heavy duty chrome plated 3/4 inch cylinder shafts
Two bolt installation of hydraulic cylinder and pump
No modifications necessary
Wire harness utilizes weatherproof connectors
Backwards compatible with manual turning system
Overload protection of 4,000 lbs. of extension force and 3,500 lbs. of retraction force
Includes 3 year warranty
Optional Push Tube Length:
Choose the push tube length that you need to fit your needs. If you have tracks, then choose the extended push tube to get the snow plow further out, giving you more room for the tracks to work without interference.
Optional Plow Pulley Fairlead Kit:
The Plow Pulley Fairlead Kit is designed specifically to resist wear from the steep angle that occurs between the fairlead and the plow, extending the life of your winch cable. It can be used with either a steel or synthetic cable and is constructed of black powder coated 7 gauge steel. There are two roller heights for different fairlead heights and angles and you'll receive hardware and instructions.
Standard spool pattern: 3" x 4-7/8"
Wide spool pattern: 3" x 6.67"
Optional Additional Wearbar:
If you want to keep the edges of your snow plow in top shape the Denali Polyurethane Wearbar is the choice for you. Not only is the wearbar reversible for longer use, but the polyurethane construction outlasts rubber and steel. The wearbar won't cause damage to brick, concrete, curbs and more! The wearbar is the perfect choice to increase productivity and reduce equipment wear.
Optional Pushtube Lift Kits:
When your UTV has those monster tires or that beastly lift kit on it, using a snow plow in the winter can be a pain. Finding a solution that solves the problem of your pushtube matching the height of your machine can mean complete removal of your tires or lift. With the Denali Pushtube Lift Kit installed, you can keep your tires and lift kit on, while giving Jack Frost the boot! This Pushtube Lift Kit bolts directly to your existing Denali UTV Pushtube giving an easy install, the 2 inch lift will give you 13-15 inches off the ground, and the 4 inch will give you 15-17, all while meeting your snow plow needs!