Yamaha Wolverine RMAX2 1000 72 Inch Plow
SSL Secure and
Privacy Guaranteed
SSL Secured
Expert Support
Product Description
NOTES:
- CANNOT SHIP TO ALASKA OR HAWAII.
- Must have a winch to use plow system.
Applicability: 2021 Yamaha Wolverine RMAX2 1000 and Wolverine RMAX4 1000
If you’re tired of shoveling snow by hand, you are officially part of the club! Why work harder when you can work smarter? Pull that UTV out of the garage and put it to work. Check out the Denali 72 Inch Pro Series Snow Plow System for the Yamaha Wolverine RMAX 1000. Outfit your rig today so you can whip old Jack Frost into shape next time he decides to visit!
Take your pick between red, yellow, and black blades. A tapered design not only has the DOT look, but the function as well. Edge stiffeners and a stabilizer bar are the perfect addition for long-term support and durability. Included plow markers are a dream when visibility is low. Adjustable skid feet keep the blade looking fresh as a daisy when traversing rough surfaces.
Push tubes are the backbone of any good plow system. Installation and removal has never been easier, just pull the pin and take off! A structural steel tube cross bar provides added lateral rigidity to the impact resistant reinforced pivot assembly. Pairing that badass component with a front mount is the perfect coupling of accessories. The ¼-inch steel plate has slotted holes which allow the blade to hug the ground for perfect, even swipes every time!
Side By Side Stuff believes in options, and options we have! Tired of still getting cold when the blade needs adjusting? Fret no more, just add the hydroturn. A full radius turn is completed in as little as 5 seconds, while driving! Extended push tubes are necessary for those with track systems. Even mad monsters can get down and dirty with work when the Pushtube lift kit is part of your winter arsenal.
Still not sure if this is right for you? Check out the helpful videos below. As always our helpful customer service team is here to help with any of your questions!
Blade Specifications:
Push Tube Specifications:
Plow Mount Specifications:
Optional Hydroturn Specifications:
Optional Push Tube Length:
Choose the push tube length that you need to fit your needs. If you have tracks, then choose the extended push tube to get the snow plow further out, giving you more room for the tracks to work without interference.
Optional Plow Pulley Fairlead Kit:
The Plow Pulley Fairlead Kit is designed specifically to resist wear from the steep angle that occurs between the fairlead and the plow, extending the life of your winch cable. It can be used with either a steel or synthetic cable and is constructed of black powder coated 7 gauge steel. There are two roller heights for different fairlead heights and angles and you'll receive hardware and instructions.
Optional Pushtube Lift Kits:
When your UTV has those monster tires or that beastly lift kit on it, using a snow plow in the winter can be a pain. Finding a solution that solves the problem of your pushtube matching the height of your machine can mean complete removal of your tires or lift. With the Denali Pushtube Lift Kit installed, you can keep your tires and lift kit on, while giving Jack Frost the boot! This Pushtube Lift Kit bolts directly to your existing Denali UTV Pushtube giving an easy install, the 2 inch lift will give you 13-15 inches off the ground, and the 4 inch will give you 15-17, all while meeting your snow plow needs!
- CANNOT SHIP TO ALASKA OR HAWAII.
- Must have a winch to use plow system.
Applicability: 2021 Yamaha Wolverine RMAX2 1000 and Wolverine RMAX4 1000
If you’re tired of shoveling snow by hand, you are officially part of the club! Why work harder when you can work smarter? Pull that UTV out of the garage and put it to work. Check out the Denali 72 Inch Pro Series Snow Plow System for the Yamaha Wolverine RMAX 1000. Outfit your rig today so you can whip old Jack Frost into shape next time he decides to visit!
Take your pick between red, yellow, and black blades. A tapered design not only has the DOT look, but the function as well. Edge stiffeners and a stabilizer bar are the perfect addition for long-term support and durability. Included plow markers are a dream when visibility is low. Adjustable skid feet keep the blade looking fresh as a daisy when traversing rough surfaces.
Push tubes are the backbone of any good plow system. Installation and removal has never been easier, just pull the pin and take off! A structural steel tube cross bar provides added lateral rigidity to the impact resistant reinforced pivot assembly. Pairing that badass component with a front mount is the perfect coupling of accessories. The ¼-inch steel plate has slotted holes which allow the blade to hug the ground for perfect, even swipes every time!
Side By Side Stuff believes in options, and options we have! Tired of still getting cold when the blade needs adjusting? Fret no more, just add the hydroturn. A full radius turn is completed in as little as 5 seconds, while driving! Extended push tubes are necessary for those with track systems. Even mad monsters can get down and dirty with work when the Pushtube lift kit is part of your winter arsenal.
Still not sure if this is right for you? Check out the helpful videos below. As always our helpful customer service team is here to help with any of your questions!
Blade Specifications:
- U.S.A. made
- County-style blade with curved design made of 12 gauge steel
- Impact resistant reinforcement system disperses force of impact to the sturdiest part of the UTV, preventing damage from sudden impact
- Includes edge stiffeners and stabilizer bar
- Sand blasted, powder coated with epoxy primer and TGIC polyester top coat for corrosion protection, UV resistance and durability
- Available in black, red or yellow
- High strength, high yield 3/16 inch thick grade 50 steel wear bar
- Angle blade is 23 inches on the tallest side and 16 inches on the shortest side
- Rubber flap stabilizer bar with upgraded (stiffer) rubber flap
- Plow markers included
- Height and angle adjustable premium steel skid feet
- Includes 3 year warranty on the plow blade against manufacturer defects
Push Tube Specifications:
- Impact resistant reinforced pivot assembly
- Turn system allows for easy blade positioning in different angles to the left or right - 0 degrees, 12.5 degrees and 25 degrees
- Simple detachment systems with the pull of a pin
- Structural tube steel cross bar for added lateral rigidity
Plow Mount Specifications:
- Front mount
- 100% laser cut 1/4 inch steel
- Slotted holes allow blade to hug the ground
Optional Hydroturn Specifications:
- Parker hydraulics system with built in relief valve overload protection
- Hydraulic system is completely sealed for life
- Full radius turn in just 5 seconds while driving
- Heavy duty chrome plated 3/4 inch cylinder shafts
- Two bolt installation of hydraulic cylinder and pump
- No modifications necessary
- Wire harness utilizes weatherproof connectors
- Backwards compatible with manual turning system
- Overload protection of 4,000 lbs. of extension force and 3,500 lbs. of retraction force
- Includes 3 year warranty
Optional Push Tube Length:
Choose the push tube length that you need to fit your needs. If you have tracks, then choose the extended push tube to get the snow plow further out, giving you more room for the tracks to work without interference.
Optional Plow Pulley Fairlead Kit:
The Plow Pulley Fairlead Kit is designed specifically to resist wear from the steep angle that occurs between the fairlead and the plow, extending the life of your winch cable. It can be used with either a steel or synthetic cable and is constructed of black powder coated 7 gauge steel. There are two roller heights for different fairlead heights and angles and you'll receive hardware and instructions.
- Standard spool pattern: 3" x 4-7/8"
- Wide spool pattern: 3" x 6.67"
Optional Pushtube Lift Kits:
When your UTV has those monster tires or that beastly lift kit on it, using a snow plow in the winter can be a pain. Finding a solution that solves the problem of your pushtube matching the height of your machine can mean complete removal of your tires or lift. With the Denali Pushtube Lift Kit installed, you can keep your tires and lift kit on, while giving Jack Frost the boot! This Pushtube Lift Kit bolts directly to your existing Denali UTV Pushtube giving an easy install, the 2 inch lift will give you 13-15 inches off the ground, and the 4 inch will give you 15-17, all while meeting your snow plow needs!
