- CANNOT SHIP TO ALASKA OR HAWAII.
- Must have a winch to use plow system.
- The 2016-17 Wolverine R-Spec SE models will require drilling out of two holes.
Applicability: 2016-18 Yamaha Wolverine and Wolverine R-Spec
Thinking about putting a snow plow on your Yamaha Wolverine to plow your own driveway or make a little extra cash over the long winter months? Then you have come to the right place. The Denali 72 Inch Pro Series Snow Plow is the Cadillac of snow plows. With a 6 foot blade you will be done plowing in no time. Why put your machine up for the winter when you can use it to the work for you? Save that old snow shovel for the sidewalks and get yourself a plow system. You won't regret it when old man winter dumps that first load of snow.
The Denali 72 Inch Pro Series Snow Plow is sand blasted, powder coated with epoxy primer and TGIC polyester top coat for corrosion protection, UV resistance and durability. The county-style blade has a curved design and is made of 12 gauge steel available in black, red, or yellow. The impact resistant reinforcement system disperses the force of impact to the sturdiest part of your UTV, preventing damage from sudden impacts. The included push tube has a turn system, allowing for easy blade positioning in different angles to the left or right. You will need a winch to use the plow system so be sure to check out our winches before you place your order.
County-style blade with curved design made of 12 gauge steel
Impact resistant reinforcement system disperses force of impact to the sturdiest part of the UTV, preventing damage from sudden impact
Includes edge stiffeners and stabilizer bar
Sand blasted, powder coated with epoxy primer and TGIC polyester top coat for corrosion protection, UV resistance and durability
Available in black, red or yellow
High strength, high yield 3/16 inch thick grade 50 steel wear bar
Angle blade is 23 inches on the tallest side and 16 inches on the shortest side
Rubber flap stabilizer bar with upgraded (stiffer) rubber flap
Plow markers included
Height and angle adjustable premium steel skid feet
Includes 3 year warranty on the plow blade against manufacturer defects
Push Tube Specifications:
Impact resistant reinforced pivot assembly
Turn system allows for easy blade positioning in different angles to the left or right - 0 degrees, 12.5 degrees and 25 degrees
Simple detachment systems with the pull of a pin
Structural tube steel cross bar for added lateral rigidity
Plow Mount Specifications:
100% laser cut 1/4 inch steel
Slotted holes allow blade to hug the ground
Optional Hydroturn Specifications:
Parker hydraulics system with built in relief valve overload protection
Hydraulic system is completely sealed for life
Full radius turn in just 5 seconds while driving
Heavy duty chrome plated 3/4 inch cylinder shafts
Two bolt installation of hydraulic cylinder and pump
No modifications necessary
Wire harness utilizes weatherproof connectors
Backwards compatible with manual turning system
Overload protection of 4,000 lbs. of extension force and 3,500 lbs. of retraction force
Includes 3 year warranty
Optional Push Tube Length:
Choose the push tube length that you need to fit your needs. If you have tracks, then choose the extended push tube to get the snow plow further out, giving you more room for the tracks to work without interference.
Optional Plow Pulley Fairlead Kit:
The Plow Pulley Fairlead Kit is designed specifically to resist wear from the steep angle that occurs between the fairlead and the plow, extending the life of your winch cable. It can be used with either a steel or synthetic cable and is constructed of black powder coated 7 gauge steel. There are two roller heights for different fairlead heights and angles and you'll receive hardware and instructions.
Standard spool pattern: 3" x 4-7/8"
Wide spool pattern: 3" x 6.67"
Optional Pushtube Lift Kits:
When your UTV has those monster tires or that beastly lift kit on it, using a snow plow in the winter can be a pain. Finding a solution that solves the problem of your pushtube matching the height of your machine can mean complete removal of your tires or lift. With the Denali Pushtube Lift Kit installed, you can keep your tires and lift kit on, while giving Jack Frost the boot! This Pushtube Lift Kit bolts directly to your existing Denali UTV Pushtube giving an easy install, the 2 inch lift will give you 13-15 inches off the ground, and the 4 inch will give you 15-17, all while meeting your snow plow needs!