- CANNOT SHIP TO ALASKA OR HAWAII.
- Must have a winch to use plow system.
Applicability: 2018-20 Can Am Maverick Sport and 2018-20 Can Am Maverick Trail
If you've got yourself a big snow removal job, Side By Side Stuff has a UTV snow plow package you can't refuse. This Maverick Sport 72 Inch Standard Series Snow Plow Systems has the grit to quickly and efficiently get the job done. It's designed to function in terrible weather conditions, so durability is no factor. The aftermarket snowplow easily installs to your machine, with impeccable stability and support provided by the model-specific mount and push tube. Let's see what this blade is all about, shall we?
The 11-gauge steel snow plow blade features a 19-inch scoop supported by four ribs and three horizontal stabilizers. This method of engineering increases the efficiency of snow roll-off by rolling it up and ejecting it forward. A center mounting system also reduces potential damage because it diverts all the impact on the buggy's sturdiest location. Also included in the kit are the push tubes, wear bars, skid feet, and all the necessary hardware for the clean and straightforward install. Don't forget about all these fancy upgrades available. They will improve performance and convenience even further. Be sure to give us a call with questions. We've got your back!
11 gauge steel leading horizontal supports
Four 7 gauge ribs run the full length of the blade
Three additional 7 gauge horizontal stabilizers support the deepest point of the blade
65 degree attack angle and over center design ensures snow rolls up and is thrown forward
Replaceable 7 gauge, grade 50 steel wear bar
Height and angle adjustable skid feet included
Center mounted plow disperses force of impact to the sturdiest part of the UTV, preventing damage from sudden impact
3 year warranty
Push Tube Specifications:
Impact resistant reinforced pivot assembly
Turn system allows for easy blade positioning in different angles to the left or right - 0 degrees. 12.5 degrees and 25 degrees
Simple detachment systems with the pull of a pin
Structural tube steel cross bar for added lateral rigidity
Plow Mount Specifications:
100% laser cut 1/4 inch steel
Slotted holes allow blade to hug the ground
Optional Rubber Flap Upgrade Specifications:
Stiff rubber flap
Metal hold down bar
Optional Hydroturn Specifications:
Parker hydraulics system with built in relief valve overload protection
Hydraulic system is completely sealed for life
Full radius turn in just 5 seconds while driving
Heavy duty chrome plated 3/4 inch cylinder shafts
Two bolt installation of hydraulic cylinder and pump
No modifications necessary
Wire harness utilizes weatherproof connectors
Backwards compatible with manual turning system
Overload protection of 4,000 lbs. of extension force and 3,500 lbs. of retraction force
Includes 3 year warranty
Optional Push Tube Length:
Choose the push tube length that you need to fit your needs. If you have tracks, then choose the extended push tube to get the snow plow further out, giving you more room for the tracks to work without interference.
Optional Plow Markers:
Snow getting high or need to plow close to vehicles or other items? Get the snow plow markers so you can see exactly where the edge of your blade is, letting you have the most control.
Optional Plow Pulley Fairlead Kit:
The Plow Pulley Fairlead Kit is designed specifically to resist wear from the steep angle that occurs between the fairlead and the plow, extending the life of your winch cable. It can be used with either a steel or synthetic cable and is constructed of black powder coated 7 gauge steel. There are two roller heights for different fairlead heights and angles and you'll receive hardware and instructions.
Standard spool pattern: 3" x 4-7/8"
Wide spool pattern: 3" x 6.67"
Optional Box Ends
If you want to keep the snow from rolling our the sides of your Denali snow plow, get the box ends right here. These are 1/4" thick steel and include height and angle adjustable skid foot brackets. All the necessary installation instructions and hardware are included also.
Optional Pushtube Lift Kits:
When your UTV has those monster tires or that beastly lift kit on it, using a snow plow in the winter can be a pain. Finding a solution that solves the problem of your pushtube matching the height of your machine can mean complete removal of your tires or lift. With the Denali Pushtube Lift Kit installed, you can keep your tires and lift kit on, while giving Jack Frost the boot! This Pushtube Lift Kit bolts directly to your existing Denali UTV Pushtube giving an easy install, the 2 inch lift will give you 13-15 inches off the ground, and the 4 inch will give you 15-17, all while meeting your snow plow needs!