- CANNOT SHIP TO ALASKA OR HAWAII.
- Must have a winch to use plow system.
- Machines listed in the drop down with skid plates 13-17 inches off of the ground come with a PushTube Lift Kit so an additional kit will not be required.
Applicability: Polaris RZR (See options above)
Here at SideBySideStuff.com we know the importance of work before play and that’s why we offer so many great accessory options that outfit your machine for both. So if you are like us we know you will appreciate this Denali 72” Inch Standard Series Plow System that’s designed to install quickly and easily on your Polaris RZR. The Denali snow plow system is a great addition to your RZR 800, RZR S 900, RZR XP 1000 or other RZR model.
The Denali Standard Series Snow Plow System is an all-inclusive kit designed specifically for your Polaris RZR. The kits include a high strength 1/4" precision laser cut steel plate. From there we can move to the impact resistant push tube; the push tube features 6 position blade adjustment capabilities as well as a structural steel cross bar for extra strength and rigidity. From there it moves to the 72-inch-long high strength steel snow plow. The plow features multiple strengthening ribs running the full length of the plow. From there you can add one of the many additional accessories that are available as well; they are listed below and are designed to further alleviate your work load making for less time in the cold and more time inside enjoying the warmth.
11 gauge steel leading horizontal supports
Four 7 gauge ribs run the full length of the blade
Three additional 7 gauge horizontal stabilizers support the deepest point of the blade
65 degree attack angle and over center design ensures snow rolls up and is thrown forward
Replaceable 7 gauge, grade 50 steel wear bar
Height and angle adjustable skid feet included
Center mounted plow disperses force of impact to the sturdiest part of the UTV, preventing damage from sudden impact
3 year warranty
Push Tube Specifications:
Impact resistant reinforced pivot assembly
Turn system allows for easy blade positioning in different angles to the left or right - 0 degrees. 12.5 degrees and 25 degrees
Simple detachment systems with the pull of a pin
Structural tube steel cross bar for added lateral rigidity
Plow Mount Specifications:
100% laser cut 1/4 inch steel
Slotted holes allow blade to hug the ground
Optional Rubber Flap Upgrade Specifications:
Stiff rubber flap
Metal hold down bar
Optional Hydroturn Specifications:
Parker hydraulics system with built in relief valve overload protection
Hydraulic system is completely sealed for life
Full radius turn in just 5 seconds while driving
Heavy duty chrome plated 3/4 inch cylinder shafts
Two bolt installation of hydraulic cylinder and pump
No modifications necessary
Wire harness utilizes weatherproof connectors
Backwards compatible with manual turning system
Overload protection of 4,000 lbs. of extension force and 3,500 lbs. of retraction force
Includes 3 year warranty
Optional Push Tube Length:
Choose the push tube length that you need to fit your needs. If you have tracks, then choose the extended push tube to get the snow plow further out, giving you more room for the tracks to work without interference.
Optional Plow Markers:
Snow getting high or need to plow close to vehicles or other items? Get the snow plow markers so you can see exactly where the edge of your blade is, letting you have the most control.
Optional Plow Pulley Fairlead Kit:
The Plow Pulley Fairlead Kit is designed specifically to resist wear from the steep angle that occurs between the fairlead and the plow, extending the life of your winch cable. It can be used with either a steel or synthetic cable and is constructed of black powder coated 7 gauge steel. There are two roller heights for different fairlead heights and angles and you'll receive hardware and instructions.
Standard spool pattern: 3" x 4-7/8"
Wide spool pattern: 3" x 6.67"
Optional Box Ends:
If you want to keep the snow from rolling our the sides of your Denali snow plow, get the box ends right here. These are 1/4" thick steel and include height and angle adjustable skid foot brackets. All the necessary installation instructions and hardware are included also.
Optional Pushtube Lift Kits:
When your UTV has those monster tires or that beastly lift kit on it, using a snow plow in the winter can be a pain. Finding a solution that solves the problem of your pushtube matching the height of your machine can mean complete removal of your tires or lift. With the Denali Pushtube Lift Kit installed, you can keep your tires and lift kit on, while giving Jack Frost the boot! This Pushtube Lift Kit bolts directly to your existing Denali UTV Pushtube giving an easy install, the 2 inch lift will give you 13-15 inches off the ground, and the 4 inch will give you 15-17, all while meeting your snow plow needs!
Denali snow plow, November 14, 2018
Posted By: Steve - verified customer
Delivered on time, easy assembly, great quality, very pleased with purchase.
Great plow for the money. Mounted it on my RZR 900 trail. I was worried this plow might be a bit much for my RZR but it handles it no problem. If you have a large area that needs plowed quite often the 72 inch makes quick work compared to the smaller plows you see on most side by sides and wheelers.
Excellent customer service! I accidentally ordered 2 plow rollers and you called me to see if everything I ordered was for the same machine. It was and I did not need two rollers so you guys took one off my order. It just showed me that you take your business seriously it would have been easier for you to just send two than call and see if I really needed two. Thank you
Purchased the Denali plow based on reviews. Purchased from Side by Side Stuff for price. Both have exceeded my expectation although only used 3 times, none has been more than 8 inches. Delivered faster than expected. Definitely would buy again and strongly recommend both Side by Side Stuff and Denali.