72 Inch Plow System for Yamaha YXZ1000R

NOTES:
- CANNOT SHIP TO ALASKA OR HAWAII.
- Must have a winch to use plow system.


Applicability: 2017-21 Yamaha YXZ1000R and YXZ1000R SS


There is a time for play and a time for work. Unfortunately, when Jack Frost pays us a visit, the work can get downright exhausting. Unless we take our ground-pounding monster and turn it into a ground-plowing workhorse. All you need is a durable YXZ 1000 R snowplow system. We know, we know. Who wants to mess with installing a heavy piece of equipment up to their sport machine? Well, friends, with the Denali 72 Inch Standard Series Snow Plow System, you get the benefit of work efficiency minus the inconvenience. Let's see how Denali pulls this off.

Before we dig into the blade perks, we'll let you in on the secret. This innovative push tube is not only designed with an impact-resistant pivot assembly, but it's also decked out with a pull-pin detachment system. That's right; once you're done doing the deed, you can easily remove the UTV attachment in minutes. Now, about this blade. The Yamaha snowplow blade is formed in a curved formation to increase snow roll-off, with outstanding adjustability and multiple stabilizer bars. Get the work done quicker with the YXZ 1000R snowplow system so you can get out there and enjoy some winter adventure.


Blade Specifications:

• 19" scoop
  
• 11 gauge steel leading horizontal supports
  
• Four 7 gauge ribs run the full length of the blade
  
• Three additional 7 gauge horizontal stabilizers support the deepest point of the blade
  
• 65 degree attack angle and over center design ensures snow rolls up and is thrown forward
  
• Replaceable 7 gauge, grade 50 steel wear bar
  
• Height and angle adjustable skid feet included
  
• Center mounted plow disperses force of impact to the sturdiest part of the UTV, preventing damage from sudden impact
  
• 3 year warranty

Push Tube Specifications:

• Impact resistant reinforced pivot assembly
  
• Turn system allows for easy blade positioning in different angles to the left or right - 0 degrees, 12.5 degrees and 25 degrees
  
• Simple detachment systems with the pull of a pin
  
• Structural tube steel cross bar for added lateral rigidity

Plow Mount Specifications:

• Front mount
• 100% laser cut 1/4 inch steel
  
• Slotted holes allow blade to hug the ground

Optional Rubber Flap Upgrade Specifications:

• Stiff rubber flap
  
• Metal hold down bar
  
• Installation hardware

Optional Hydroturn Specifications:

• Parker hydraulics system with built in relief valve overload protection
  
• Hydraulic system is completely sealed for life
  
• Full radius turn in just 5 seconds while driving
  
• Heavy duty chrome plated 3/4 inch cylinder shafts
  
• Two bolt installation of hydraulic cylinder and pump
  
• No modifications necessary
  
• Wire harness utilizes weatherproof connectors
  
• Backwards compatible with manual turning system
  
• Overload protection of 4,000 lbs. of extension force and 3,500 lbs. of retraction force
  
• Includes 3 year warranty

Optional Push Tube Length:
Choose the push tube length that you need to fit your needs. If you have tracks, then choose the extended push tube to get the snow plow further out, giving you more room for the tracks to work without interference.


Optional Plow Markers:
Snow getting high or need to plow close to vehicles or other items? Get the snow plow markers so you can see exactly where the edge of your blade is, letting you have the most control.


Optional Plow Pulley Fairlead Kit:
The Plow Pulley Fairlead Kit is designed specifically to resist wear from the steep angle that occurs between the fairlead and the plow, extending the life of your winch cable. It can be used with either a steel or synthetic cable and is constructed of black powder coated 7 gauge steel. There are two roller heights for different fairlead heights and angles and you'll receive hardware and instructions.

• Standard spool pattern: 3" x 4-7/8"
• Wide spool pattern: 3" x 6.67"

Optional Box Ends:
If you want to keep the snow from rolling our the sides of your Denali snow plow, get the box ends right here. These are 1/4" thick steel and include height and angle adjustable skid foot brackets. All the necessary installation instructions and hardware are included also.


Optional Pushtube Lift Kits:
When your UTV has those monster tires or that beastly lift kit on it, using a snow plow in the winter can be a pain. Finding a solution that solves the problem of your pushtube matching the height of your machine can mean complete removal of your tires or lift. With the Denali Pushtube Lift Kit installed, you can keep your tires and lift kit on, while giving Jack Frost the boot! This Pushtube Lift Kit bolts directly to your existing Denali UTV Pushtube giving an easy install, the 2 inch lift will give you 13-15 inches off the ground, and the 4 inch will give you 15-17, all while meeting your snow plow needs!