- CANNOT SHIP TO ALASKA OR HAWAII.
- Must have a winch to use plow system.
Applicability: 2021 Yamaha Wolverine RMAX2 1000 and Wolverine RMAX4 1000
Winter is coming, are you prepared? Snowfall is beautiful but treacherous for those of us who enjoy year-round riding. So get ready to rock this winter and make shoveling a thing of the past. Instead, put your rig to work using the Yamaha RMAX 1000 Denali 72 inch Standard Series Snow Plow System. Spend less time frustrated with shoveling and more time getting back to the things you love during this season.
What's so amazing about this UTV plow system, you might wonder? A 19-inch scoop with an 11 gauge steel support is one feature that speaks for itself. This addition has fully adjustable skid feet paired with an over-center design to ensure snow rolls up and goes forward. Add in the replaceable grade 50 steel wear bar and let your concerns fall away with the snow.
The next notable feature is the impact-resistant and reinforced pivot assembly push tubes. Seamless blade position with various angles will have you tackling drifts in no time! Want to play after the work is done? Pull the pin and go; removing the side-by-side snow plow is simple as that! Having a firm structure when plowing is essential. A structural tube steel crossbar adds lateral rigidity.
The final component for this Yamaha snow plow kit is probably the most important. How do you beat the snow into submission without a way to connect other off-road attachments to your rig? The answer is you can't! The front mount design provides easy access for assembly and storage. Slotted holes allow the blade to hug the ground, shaving the snow as close as possible!
If none of that excites you, then maybe the optional hydroturn with a three-year warranty will get your wallet ready. Additionally, you'll have an overload of protection up to four thousand pounds with the hydraulic cylinder and pump to make positioning the blade easy. So let SideBySideStuff.com take care of you with the Denali 72 inch Standard Series Snow Plow System for the RMAX 1000!
11 gauge steel leading horizontal supports
Four 7 gauge ribs run the full length of the blade
Three additional 7 gauge horizontal stabilizers support the deepest point of the blade
65 degree attack angle and over center design ensures snow rolls up and is thrown forward
Replaceable 7 gauge, grade 50 steel wear bar
Height and angle adjustable skid feet included
Center mounted plow disperses force of impact to the sturdiest part of the UTV, preventing damage from sudden impact
3 year warranty
Push Tube Specifications:
Impact resistant reinforced pivot assembly
Turn system allows for easy blade positioning in different angles to the left or right - 0 degrees, 12.5 degrees and 25 degrees
Simple detachment systems with the pull of a pin
Structural tube steel cross bar for added lateral rigidity
Plow Mount Specifications:
100% laser cut 1/4 inch steel
Slotted holes allow blade to hug the ground
Optional Rubber Flap Upgrade Specifications:
Stiff rubber flap
Metal hold down bar
Optional Hydroturn Specifications:
Parker hydraulics system with built in relief valve overload protection
Hydraulic system is completely sealed for life
Full radius turn in just 5 seconds while driving
Heavy duty chrome plated 3/4 inch cylinder shafts
Two bolt installation of hydraulic cylinder and pump
No modifications necessary
Wire harness utilizes weatherproof connectors
Backwards compatible with manual turning system
Overload protection of 4,000 lbs. of extension force and 3,500 lbs. of retraction force
Includes 3 year warranty
Optional Push Tube Length:
Choose the push tube length that you need to fit your needs. If you have tracks, then choose the extended push tube to get the snow plow further out, giving you more room for the tracks to work without interference.
Optional Plow Markers:
Snow getting high or need to plow close to vehicles or other items? Get the snow plow markers so you can see exactly where the edge of your blade is, letting you have the most control.
Optional Plow Pulley Fairlead Kit:
The Plow Pulley Fairlead Kit is designed specifically to resist wear from the steep angle that occurs between the fairlead and the plow, extending the life of your winch cable. It can be used with either a steel or synthetic cable and is constructed of black powder coated 7 gauge steel. There are two roller heights for different fairlead heights and angles and you'll receive hardware and instructions.
Standard spool pattern: 3" x 4-7/8"
Wide spool pattern: 3" x 6.67"
Optional Box Ends:
If you want to keep the snow from rolling our the sides of your Denali snow plow, get the box ends right here. These are 1/4" thick steel and include height and angle adjustable skid foot brackets. All the necessary installation instructions and hardware are included also.
Optional Pushtube Lift Kits:
When your UTV has those monster tires or that beastly lift kit on it, using a snow plow in the winter can be a pain. Finding a solution that solves the problem of your pushtube matching the height of your machine can mean complete removal of your tires or lift. With the Denali Pushtube Lift Kit installed, you can keep your tires and lift kit on, while giving Jack Frost the boot! This Pushtube Lift Kit bolts directly to your existing Denali UTV Pushtube giving an easy install, the 2 inch lift will give you 13-15 inches off the ground, and the 4 inch will give you 15-17, all while meeting your snow plow needs!