- CANNOT SHIP TO ALASKA OR HAWAII.
- The Can Am Maverick X3 plow mount requires the winch mount MA11749 to use plow system.
- The Can Am Maverick X3 is only compatible with the wide spool plow pulley fairlead.
- Must have a winch to use plow system.
2011-20 Can Am Commander and Commander Max
2013-18 Can Am Maverick and Maverick Max
2016 Maverick XC 1000R
2016-20 Can Am Defender and Defender Max
2017-20 Can Am Maverick X3 and Maverick X3 Max
Your UTV is made both for having fun along with getting the work done. During this winter season you can be assured that the Denali Standard Series Snow Plow System with a 65 degree attack angle will keep your machine running year round. Along with the 19" scoop blade this plow has an over the center design that ensures the snow rolls up and is thrown forward.
Whether you have a Can Am Commander or a Can Am Maverick, this plow is perfect for you. Enabled with a simple detachment system it makes both putting on and taking off the plow easier than ever. You'll get the plow blade, model specific plow mount and push tube along with choices for an optional rubber flap and optional hydroturn system with this snow plow system.
11 gauge steel leading horizontal supports
Four 7 gauge ribs run the full length of the blade
Three additional 7 gauge horizontal stabilizers support the deepest point of the blade
65 degree attack angle and over center design ensures snow rolls up and is thrown forward
Replaceable 7 gauge, grade 50 steel wear bar
Height and angle adjustable skid feet included
Center mounted plow disperses force of impact to the sturdiest part of the UTV, preventing damage from sudden impact
3 year warranty
Push Tube Specifications:
Impact resistant reinforced pivot assembly
Turn system allows for easy blade positioning in different angles to the left or right - 0 degrees. 12.5 degrees and 25 degrees
Simple detachment systems with the pull of a pin
Structural tube steel cross bar for added lateral rigidity
Plow Mount Specifications:
100% laser cut 1/4 inch steel
Slotted holes allow blade to hug the ground
Optional Rubber Flap Upgrade Specifications:
Stiff rubber flap
Metal hold down bar
Optional Hydroturn Specifications:
Parker hydraulics system with built in relief valve overload protection
Hydraulic system is completely sealed for life
Full radius turn in just 5 seconds while driving
Heavy duty chrome plated 3/4 inch cylinder shafts
Two bolt installation of hydraulic cylinder and pump
No modifications necessary
Wire harness utilizes weatherproof connectors
Backwards compatible with manual turning system
Overload protection of 4,000 lbs. of extension force and 3,500 lbs. of retraction force
Includes 3 year warranty
Optional Push Tube Length:
Choose the push tube length that you need to fit your needs. If you have tracks, then choose the extended push tube to get the snow plow further out, giving you more room for the tracks to work without interference.
Optional Plow Markers:
Snow getting high or need to plow close to vehicles or other items? Get the snow plow markers so you can see exactly where the edge of your blade is, letting you have the most control.
Optional Plow Pulley Fairlead Kit:
The Plow Pulley Fairlead Kit is designed specifically to resist wear from the steep angle that occurs between the fairlead and the plow, extending the life of your winch cable. It can be used with either a steel or synthetic cable and is constructed of black powder coated 7 gauge steel. There are two roller heights for different fairlead heights and angles and you'll receive hardware and instructions.
Standard spool pattern: 3" x 4-7/8"
Wide spool pattern: 3" x 6.67"
Optional Box Ends:
If you want to keep the snow from rolling out the sides of your Denali snow plow, get the box ends right here. These are 1/4" thick steel and include height and angle adjustable skid foot brackets. All the necessary installation instructions and hardware are included also.
Optional Additional Wearbar:
If you want to keep the edges of your snow plow in top shape the Denali Polyurethane Wearbar is the choice for you. Not only is the wearbar reversible for longer use, but the polyurethane construction outlasts rubber and steel. The wearbar won't cause damage to brick, concrete, curbs and more! The wearbar is the perfect choice to increase productivity and reduce equipment wear.
Optional Pushtube Lift Kits:
When your UTV has those monster tires or that beastly lift kit on it, using a snow plow in the winter can be a pain. Finding a solution that solves the problem of your pushtube matching the height of your machine can mean complete removal of your tires or lift. With the Denali Pushtube Lift Kit installed, you can keep your tires and lift kit on, while giving Jack Frost the boot! This Pushtube Lift Kit bolts directly to your existing Denali UTV Pushtube giving an easy install, the 2 inch lift will give you 13-15 inches off the ground, and the 4 inch will give you 15-17, all while meeting your snow plow needs!
Single and fun, December 15, 2017
Posted By: Jason Sandow - verified customer
It was a little bit to figure it out but all in all a great buy.
Posted By: Tony - verified customer 9 people found this review helpful
This is an awesome snow blade, it's built well, made of good quality material and heavy duty. I am well satisfied with the blade but, the mounting plate that actually mounts to the machine is a problem. It does fit right and all the pre-drilled holes are correct but, the mounting ears that the blade actually connects with are about three inches below that bottom of the mounting plate! This reduces my ground clearance to much to operate my machine off road with the mounting plate installed. I plan on a modification of the mounting plate and would strongly suggest the future buyers of this snow plow check your ground clearance needs before you buy. I would also suggest the manufacture of this snow blade do further study of this mounting plate as to making it a permanent fixture instead of an on-off application for off road use of my machine. Sorry