Polaris RZR XP 1000 Forward Control Arms

NOTES:
- Does NOT fit Desert Edition. In order to work on the RZR XP Turbo models and FOX Edition, you must remove front factory sway bar for these applications. The front sway bar will not work in conjunction with High Lifter Max Clearance Kit when installing on Turbo and FOX Edition RZR Models.
- There are currently no accurate photos of the control arms in the colors sky blue or High Lifter Edition orange.


Applicability: 2014-22 Polaris RZR XP 1000 / RZR XP Turbo / RZR XP 4 1000 / RZR XP 4 Turbo


On a perfect day you have your Polaris RZR XP 1000 out with the gang running the riverbeds and climbing on the rocks. One of the things you will have to watch is catching your control arms on a rock or log. Side By Side Stuff offers Forward Control Arms by High Lifter that will give you more ground clearance without lifting you RZR and losing your center of gravity. This will also give you more room if you want to add bigger tires making it a great way to get more ground clearance without lifting your machine.

The forward control arms are made of 1-1/4 inch steel tubing and the lower arm is arched in 2 places for better ground clearance and stability. This kit will move your hubs forward 1.5 inches for extra clearance and give you room to increase your tire size. These a-arms come in different colors and are powder coated for lasting wear. Since they bolt on exactly like factory a-arms using factory ball joints and bushing installation is easy.


Features:

• Front forward upper and lower control arms
• Moves front hubs forward by 1.5 inches for extra clearance
• Crafted from 1 1/4 inch DOM steel
• Lower control arm is arched in two locations
• Bolts on exactly like factory a-arms
• Powder-coated in variety of Polaris colors
• Added ground clearance featuring bends that maximize clearance and axle protection
• Easy to install and maintain
• Manufacturer's limited lifetime warranty

Optional All Balls Racing Front A-Arm Bushings:

Are your a-arm bushings becoming worn down and need to be replaced? All Balls Racing has come up with the perfect OEM replacement bushing for your machine. Each piece is designed to provide greater suspension travel and performance. Purchase yours today to replace just the front or both the front and rear and keep your machine in top notch!

• Designed to be an OEM replacement bushing
• Contains 52100 bearing steel that is hardened and precision ground
• Double lip seals Type TC
• Contains thrust shims and cup seal
• Kit contains components to replace the front a-arm bushings

Optional High Lifter Pre-Installed Ball Joints:

High Lifter made installing your new control arms easy with the pre-installed ball joints. Manufactured from 4130 chromoly steel, these ball joints are 3 times stronger than the OEM ball joints and use lithium grease! Not only are these a direct OEM factory replacement part, they are durable and tough with the long lasting zinc plated finish! Don't stress about replacing the upper and lower ball joints yourself, let High Lifter do it for you!

Optional All Balls Racing Ball Joints:

Manufactured and designed by All Balls Racing, this perfect OEM replacement ball joint is sure to impress. Their steel housing ensures toughness and durability. Each is made to be self-lubricated to keep the joint from seizing. The POM-M90 bearing cup is designed to isolate the steel rod from the housing to prevent damage. If you're looking for the perfect replacement for your worn out ball joints, grab a set for your upper and lower joints today!



 View MCFFA-RZR1 Instructions


 View MCFFA-RZR1-1 Instructions