Kawasaki Mule ProFX KFI Snow Plow

NOTES:
- Must have a winch to use plow system.
- The Mule 600 / 610 requires a KFI winch mount, which can be purchased for an additional charge above.
- The Mule Pro FX / Pro FXT requires drilling.


Applicability: Kawasaki Mule (See options above)


Whether you have a Kawasaki Mule 600, Mule 3000 or Mule 4000, you know that your UTV can handle nearly everything you throw at it so when the snow falls, get your Kawasaki Mule out to help. Your job can be easier than ever with the Open Trail Straight Steel Blade Snow Plow. This 11 gauge steel snow blade hooks to the mount for your Mule 3010 or Mule 4010 in just minutes, so there's no wasted time if you want to put it on and take it off every time you needed to plow.

The steel blade measures 16" tall, allowing you top push as much snow as your Mule can handle. Not only can you push the snow straight ahead, but the blade can be turned up to 25 degrees, allowing you to push the snow off to the sides. The KFI snow plow system comes with the straight steel blade, the push tube and the model specific mount. Check out all the great features offered below!


Straight Plow Blade Specifications:

• 100% U.S.A. made
  
• Blade constructed of 11 gauge steel
  
• Measures 16" tall
  
• Snow can be pushed straight ahead or to the sides up to 25 degrees
  
• Gusseting added for the wider width and heavier UTV
  
• Fully adjustable blade skids with bolt-on brackets
  
• Heavy duty 3" diameter, grade-50 steel skid plates
  
• 3/16" grade 50 ribbing for strong bolt up to push tube with swivel mount
  
• Metal bead blasted before they are powder coated
  
• Powder coated metallic silver
  
• 2 sided 3/16" x 3.00" grade 50 steel wear bar
  
• Wear bar attached with heavy duty grade 8 bolts
  
• Complete instructions and mounting hardware included
• 2 year KFI warranty

Push Tube Specifications:

• 100% U.S.A. made
  
• Front mount design with 30"+ of lift height
  
• Heavy duty 1-1/2" 11 gauge steel tubing
  
• Heavy duty 1-1/4" thick 1-1-/2" diameter grade 50 pivot bushings
  
• 6" diameter zinc plated rotator bushing
  
• Easy pull pin blade angle adjustment
  
• Multi-position plow lift bracket
  
• 6 five degree blade pitch adjustments
  
• 3 blade angle positions that rotate the blade up to 25 degrees
  
• Fully adjustable blade skids with bolt-on brackets
  
• Metal bead blasted before they are powder coated
  
• Powder coated black
  
• Complete installation instructions and hardware included
  
• 2 year KFI warranty

Plow Mount Specifications:

• Front mount
• 100% U.S.A. made
  
• Plate constructed from 3/16" grade 50 steel
  
• All pin tabs are constructed from 1/4" thick grade 50 steel
  
• All plow tabs are tapered to help reduce hang ups while trail riding
  
• Bead blasted before they are powder coated
  
• Powder coated black
  
• Complete installation instructions and mounting hardware included
  
• 2 year KFI warranty

Options:

• Push Tube Extension: This push tube extension positions the blade further in from of your machine, giving you room to run tracks on your side by side while plowing, keeping your tracks from interfering with the snow plow operation.
• Blade End Shield: The blade end shields attach to both ends of your straight blade, letting you move dirt, gravel or other material
• Plow Markers (Pair): Steel 89 degree angled base and bolts to the side/ends of your steel straight blade.

Optional Plow Strap Features:

• For use with standard or wide winches
• Recommended to be used with roller fairlead
• Replaces a steel/synthetic winch line during plow season
• 64 inches of overall length
• Comes with 1" wide heavy duty strap and 3/16" synthetic attachment line
• Use your existing winch hook
• Multiple spool attachment options
• Maximizes winch pulling capacity
• 2,500 lb. break strength safety feature
• Protects winch from hits and impacts
• Eliminates damage to winch by avoiding cable stacking & binding
• Reduce wear on fairleads
• Designed for plowing
• Prolongs life of cable/synthetic rope

Optional Plow Lever Lift Features:

• Repositions lift attach point to help reduce winch and cable strain from lower mounted winches and bad cable angles
• Fully adjustable for multiple angles and attach points
• Designed to work with KFI UTV Push Tube #105635 ONLY
• Constructed of heavy duty 3/16” grade 50 steel
• Shot blasted before powder coating
• Powder coated tough black
• All hardware included
• Does NOT work with the plow actuator: #105935