Can Am Outlander 500, 650 & 800 Snorkel

****PLEASE READ: THERE ARE NO RETURNS OR REFUNDS ON THIS SNORKEL KIT. Risers come in ALL black only.****


Applicability: 2006-11 Can Am Outlander 500 / 650 / 800 / 800R (Max, XT, XXC, XT-P and EPS models ONLY) and 2012 Can Am Outlander 500 / 650 all models and 800 Max models ONLY


If you plan on going deep at your local pit or pond, there are a couple recommended upgrades to ensure your best possible chance of successfully crawling on through to the other side. One of the least expensive and most effective upgrades to ensure the safety of your Can Am Oulander is a snorkel system to relocate your intakes and vent lines for your engine and clutch systems. That’s why here at SideBySideStuff.com we offer this snorkel kit by Snorkel Your ATV.

The kit is designed to be easily installed as it comes 95% assembled for less time building the kit which means installation comes sooner and is completed quickly with the included detailed instructions and photos. Unlike other kits that require heavy modification to original equipment the Snorkel Your ATV kit requires only minimal alteration to original equipment for installation. The kit allows for multiple different riser configurations so you don’t have to match everyone else when you install the kit on your machine. So if you are in the market to go deep with your Can Am take a look at this kit.

Features:

• 95% assembled and ready to bolt on
• Three (3) front risers
• Warrior risers that slide and lock together for a strong, perfectly straight install
• Warrior risers have built in vent line slots to keep vent lines high, dry and secured cleanly
• Risers come in an all black finish but can easily be painted or hydro-dipped
• No drilling into airbox required
• Connects to factory air intakes using rubber boots
• Snorkels air box, CVT inlet, CVT outlet and all vent lines
• Air intake snorkel is 2" and CVT inlet and outlet snorkels are 1-1/2"
• No tuning required
• Must drill into pod just under the handlebar, which is inexpensive to replace
• Detailed color instructions with detailed pictures included for easy installation
• Comes standard with removable Warrior Wear tips
  • Not required for use
  • Easily cleaned and reusable, come unglued so you can custom paint them (come in black ONLY)
  • Easily glued with Locktite Stick'N Seal glue and can be glued with or without the water repellent pre-filter material
  • CVT outlet SHOULD NOT have the water repellent material in place

Optional LED Snorkel Accent Lights:

• Includes one 2 inch and two 1.5 inch LED lights
• LED Snorkel lights are a key on system, meaning they come on when you turn the key on the machine

All snorkel kits may required some cutting / drilling, which is standard for snorkel kits.