When the going gets deep you need to be sure your Yamaha Kodiak 450 or Kodiak 400 is going to keep itself running and its clutches dry, transferring the necessary power to the tires to push you on through to the other side. Unfortunately, without relocating your clutch intake and exhaust vents as well as your engine intake your Kodiak just won’t cut it!
That’s why there is the need for this Warrior Riser Snorkel Kit by Snorkel Your ATV. This kit is available for all models listed above and the kit is designed to relocate all the intakes and vent lines to the front of your machine so you can be sure to keep your engine and clutches in a proper fashion. The kit is designed to work around all existing parts with no relocation of factory electronics needed to install the kit on your Kodiak ATV. Included with all kits are detailed instructions with pictures to further make installation a breeze on your machine.
Snorkels the CVT inlet, CVT outlet, airbox and all vent lines
Comes with dual 1-1/2" intake Warrior plate
CVT inlet and outlet are 1-1/2"
Warrior risers have built in vent line slots to keep vent lines high, dry and secured cleanly
Risers come in an all black finish but can easily be painted or hydro-dipped
Designed to fit around existing parts for easier installation
Works with over-sized tires and lift kits
Leaves room for radiator relocator
No re-jetting required
Risers are constructed from black schedule 40 PVC, meaning you can scratch them and they will still be black
Risers are painted with a fine black textured paint to match the flat back texture of the roll cage and other black plastics on the ATV
Comes with detailed instructions and pictures for easy installation
Comes standard with removable Warrior Wear tips
Not required for use
Easily cleaned and reusable, come unglued so you can custom paint them (come in black ONLY)
Easily glued with Locktite Stick'N Seal glue and can be glued with or without the water repellent pre-filter material
CVT outlet SHOULD NOT have the water repellent material in place
Optional LED Snorkel Accent Lights:
Includes four 1.5" LED lights
LED Snorkel lights are a key on system, meaning they come on when you turn the key on the machine
All snorkel kits may required some cutting / drilling, which is standard for snorkel kits.