NOTE: This product is currently not offered in the color lime green as shown is some photos above.
Applicability: 2016-20 Polaris General 1000 and General 4 1000
Whether you are jumping in your Polaris General 1000 to get some work done or to tear up some trails, you might find you need some extra ground clearance to get in those tough to reach places. Or, you might be looking to put some bigger tires on your General and need to make sure you have the room to do that. The High Lifter Max Clearance Front Forward Control Arms will give you the clearance and forward offset you need in these situations. With the arch of these arms, you are getting as much clearance as possible underneath your machine as well as 1.5 inches of forward offset to accommodate larger tires.
Made by High Lifter, these a-arms are made of heavy duty steel tubing that has been powder coated for long lasting durability. Installation is made easy by reusing your stock bushings and ball joints, so your General 1000 does not have to be out of commission for any longer than it has to. Backed by High Lifter's lifetime warranty, you can rest assured you are making a smart addition to your UTV. At Side By Side Stuff, we offer some great parts, but we know it's about the ride, so buy with confidence and get back out there!Features:
Optional High Lifter Pre-Installed Ball Joints:
- Front forward upper and lower control arms
- Moves front hubs forward 1.5"
- Max clearance design
- 25% larger than average stock arms
- Crafted from 1-1/4” DOM steel
- .188” wall thickness
- Powder coated
- Upper control arms have High Lifter logo precision cut into the bracing
- Easy to install and maintain
- Use stock bushings and factory ball joints for easy installation
High Lifter made installing your new control arms easy with the pre-installed ball joints. Manufactured from 4130 chromoly steel, these ball joints are 3 times stronger than the OEM ball joints and use lithium grease! Not only are these a direct OEM factory replacement part, they are durable and tough with the long lasting zinc plated finish! Don't stress about replacing the upper and lower ball joints yourself, let High Lifter do it for you! Optional All Balls Racing Ball Joints:
Manufactured and designed by All Balls Racing, this perfect OEM replacement ball joint is sure to impress. Their steel housing ensures toughness and durability. Each is made to be self-lubricated to keep the joint from seizing. The POM-M90 bearing cup is designed to isolate the steel rod from the housing to prevent damage. If you're looking for the perfect replacement for your worn out ball joints, grab a set for your upper and lower joints today!Optional All Balls Racing A-Arm Bushings:
Are your a-arm bushings becoming worn down and need to be replaced? All Balls Racing has come up with the perfect OEM replacement bushing for your machine. Each piece is designed to provide greater suspension travel and performance. Purchase yours today to replace just the front or both the front and rear and keep your machine in top notch!
- Designed to be an OEM replacement bushing
- Contains 52100 bearing steel that is hardened and precision ground
- Double lip seals Type TC
- Contains thrust shims and cup seal
- Kit contains components to replace the front or both front and rear a-arm bushings
Shared Shipping Program: You pay $28.00 shipping/handling and Side By Side Stuff will pay the rest! View Installation Instructions for 2016 models View Installation Instructions for 2017-20 models