Yamaha Wolverine Warrior Snorkel Kit

****PLEASE READ: THERE ARE NO RETURNS OR REFUNDS ON THIS SNORKEL KIT. Risers come in ALL black only.****


Applicability: 2016-18 Yamaha Wolverine and Wolverine R-Spec


When your wanting to cross that creek or get deep in that mud pit you need to be certain that your Yamaha Wolverine is going to be able to keep the clutches dry and moving while pulling in the necessary air to keep your motor running strong as your pulling through the toughest terrains. Whether you go through this type of terrain all the time or just on occasion, you should check out the Snorkel Kit by Snorkel Your ATV. These guys know their snorkels so you can be confident every time you purchase.

The kit comes 100% assembled and ready to bolt on to your machine and features a four rear riser system. The system can be disassembled easily to allow for warranty repairs should the need arise. With this system, you’ll be able to snorkel the CVT inlet, CVT outlet, air intake and all the vent lines, giving you the complete snorkel system. This means you’re safe from water and mud that you are sure to go through next time you are out on the trails by keeping air going to your motor and clutches, you are going to keep moving so long as the water doesn’t go over the snorkel level! If you are interested take a look at the features below to gain a better understanding of the kit that is available here at Side By Side Stuff.

Features:

• 100% assembled and ready to bolt on
• Four (4) rear risers
• 2" Warrior risers that slide and lock together for a strong, perfectly straight install
• Warrior risers have built in vent line slots to keep vent lines high, dry and secured cleanly
• Risers come in an all black finish but can easily be painted or hydro-dipped
• Heavy duty rubber boots for key connecting points
• No drilling into airbox required
• Connects to factory air intakes using rubber boots
• Snorkels air box, both CVT inlets, CVT outlets and all vent lines
• No tuning required
• Detailed color instructions with detailed pictures included for easy installation
• Comes standard with removable Warrior Wear tips
  • Not required for use
  • Easily cleaned and reusable, come unglued so you can custom paint them (come in black ONLY)
  • Easily glued with Locktite Stick'N Seal glue and can be glued with or without the water repellent pre-filter material
  • CVT outlet SHOULD NOT have the water repellent material in place

Optional LED Snorkel Accent Lights:

• Includes four 2 inch LED lights
• LED Snorkel lights are a key on system, meaning they come on when you turn the key on the machine

All snorkel kits may required some cutting / drilling, which is standard for snorkel kits.