D918 Wheels w| Gripper TRK Tires

NOTE: Can Am Maverick X3 typically requires you to remove or grind down the wear plates located in the front (knuckle) and rear (deflector)


Set includes 4 wheels, 4 tires, 4 center caps, 4 black beadlock rings and 16 lug nuts (if required).


Fuel Anza D918 Matte Gun Metal Beadlock Wheel:

At Side By Side Stuff we offer the Fuel Anza D918 Matte Gun Metal Beadlock Wheels for when you are trying to give your machine a new stylish look. These wheels are engineered from durable materials with a single cast alloy construction. This unique wheel will help upgrade your performance and style. It includes a matte gunmetal finish and a unique multi-spoke design that offers a great new look for your machine.


Features:

• Load rating of 1000 lbs. per wheel
• 14x7 wheels weigh 16 lbs. each and 15x7 wheels weigh 15-20 lbs. each
• Matte gun metal center with black outer ring

EFX Gripper T | R | K Tire:

You know that you can't get new wheels without getting new tires to go with them. That's why at Side By Side Stuff, we offer you the EFX Gripper Tires. These tires have a synthetic aramid fiber added to the sidewalls to help increase their strength for those tough trails ahead. Each one is tested in the toughest conditions and is strong enough to blast through an open desert. Add this wheel and tire set to your machine today and check out other products that Side By Side Stuff offers for your UTV.


Features:

• 10 ply radial
• Puncture resistant technology
• Synthetic aramid fiber added to the sidewalls that greatly increases side wall strength

Bolt Patterns and Offsets Available:

• Arctic Cat Havoc and Stampede Wheels: 4/137 pattern, 14x7 offset is 4+3 (+13mm) and 15x7 offset is 4+3 (+13mm) or 5+2 (+38mm)
  
• Arctic Cat Wildcat XX Wheels: 4/156 pattern, 14x7 offset is 4+3 (+13mm) and 15x7 offset is 4+3 (+13mm) or 5+2 (+38mm)
• Bobcat Wheels: 4/156 pattern, 14x7 offset is 4+3 (+13mm) and 15x7 offset is 4+3 (+13mm) or 5+2 (+38mm)
• Can Am Wheels: 4/137 pattern, 14x7 offset is 4+3 (+13mm) and 15x7 offset is 4+3 (+13mm) or 5+2 (+38mm)
• Honda Pioneer 1000 Wheels: 4/137 pattern, 14x7 offset is 4+3 (+13mm) and 15x7 offset is 4+3 (+13mm) or 5+2 (+38mm)
• Honda Talon Wheels: 4/137 pattern, 15x7 offset is 4+3 (+13mm) or 5+2 (+38mm)
• John Deere Gator 550 and RSX 850 Wheels: 4/137 pattern, 14x7 offset is 4+3 (+13mm) and 15x7 offset is 4+3 (+13mm) or 5+2 (+38mm)
• Kawasaki Wheels (Except Mule PRO-Series and Teryx KRX models): 4/137 pattern, 14x7 offset is 4+3 (+13mm) and 15x7 offset is 4+3 (+13mm) or 5+2 (+38mm)
• Kawasaki Teryx KRX 1000 Wheels: 4/156 pattern, 15x7 offset is 4+3 (+13mm)
• Kawasaki Mule PRO-Series Model Wheels: 4/156 pattern, 14x7 offset is 4+3 (+13mm) and 15x7 offset is 4+3 (+13mm) or 5+2 (+38mm)
• Polaris Wheels: 4/156 pattern, 14x7 offset is 4+3 (+13mm) and 15x7 offset is 4+3 (+13mm) or 5+2 (+38mm)
• Textron Havoc Wheels: 4/137 pattern, 14x7 offset is 4+3 (+13mm) and 15x7 offset is 4+3 (+13mm) or 5+2 (+38mm)
• Textron Stampede Wheels: 4/137 pattern, 14x7 offset is 4+3 (+13mm) and 15x7 offset is 4+3 (+13mm) or 5+2 (+38mm)
• Textron Wildcat XX Wheels: 4/156 pattern, 14x7 offset is 4+3 (+13mm) and 15x7 offset is 4+3 (+13mm) or 5+2 (+38mm)
• 2021-22 Yamaha Wolverine RMAX models Wheels: 4/156 pattern, 14x7 offset is 4+3 (+13mm) and 15x7 offset is 4+3 (+13mm) or 5+2 (+38mm)
  
• 2019-21 Yamaha YXZ1000R Wheels: 4/156 pattern, 14x7 offset is 4+3 (+13mm) and 15x7 offset is 4+3 (+13mm) or 5+2 (+38mm)