MSA M51 Thunderlips Gloss Black Machined Wheel - 4/137, 4/156
MSA M51 Thunderlips Gloss Black Machined Wheel - 4/137, 4/156
SSL Secured
Expert Support
Product Description
If you’re looking to give your rig a personality transplant that screams "heavy hitter," the MSA M51 Thunderlips is the wheel that’s about to steal the show. Featuring a wicked unique split-spoke design, these wheels strike that perfect balance between aggressive trail-slayer and high-end showstopper. The gloss black and machined finish adds a sharp, high-contrast pop that makes the wheel look like it's moving even when you're aired down and parked. Whether you’re running a 4/137 or 4/156 bolt pattern, these are designed to make your UTV the envy of the group ride.
But let’s be real—looking good is only half the battle when you’re buried in the mud or climbing over jagged rock. The Thunderlips are built to handle the abuse with a solid load rating of 1250 lbs. per wheel. Depending on how much "stance" you want, the geometry is dialed in perfectly: the 14x7 and 15x7 sizes feature a +10mm offset, while the massive 20x7, 22x7, and 24x7 versions rock a +0mm offset for that wide, commanding presence.
But let’s be real—looking good is only half the battle when you’re buried in the mud or climbing over jagged rock. The Thunderlips are built to handle the abuse with a solid load rating of 1250 lbs. per wheel. Depending on how much "stance" you want, the geometry is dialed in perfectly: the 14x7 and 15x7 sizes feature a +10mm offset, while the massive 20x7, 22x7, and 24x7 versions rock a +0mm offset for that wide, commanding presence.
Warning: This product can expose you to chemicals including chromium, nickel and lead which are known by the State of California to cause cancer, or birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov- Features
- Important Info
- Reviews
- Contact an Expert
Features
- Unique split-spoke design
- Gloss black and machined finish
- Load rating of 1250 lbs. per wheel
- Offset for 14x7 and 15x7 is +10mm
- Offset for 20x7, 22x7, and 24x7 is +0mm
- Includes (1) wheel and (1) bolt on cap
Important Info
- Cannot ship to Canada.
- May fit other machines not listed above that utilize the same bolt pattern.
- Can Am Maverick X3 typically requires you to remove or grind down the wear plates located in the front (knuckle) and rear (deflector).
- Does not include lug nuts. Lug nuts can be found here.
- This product cannot be returned if pre-mounted when ordered or mounted by the customer.

