NOTE: If you want to run offset a-arms with a 3" lift kit, you must have Rhino Brand Axles. Stock axles will bind.
Applicability: 2016-20 Honda Pioneer 1000 and Pioneer 1000-5
As if your Honda Pioneer 1000 isnít big and bad enough as it comes, you might be looking for ways to make it even better. When beefing up your 1000, you may need to upgrade your a-arms for a couple of reasons, adding larger tires, more clearance under your machine or both! The Super ATV High Clearance Front Forward A-Arms will give your machine 1.5 inch forward offset allowing additional room for those bigger tires you are dreaming of. With the arch of the lower control arm you will gain 2 inches of additional clearance, giving you that room to clear those rocks and branches that may normally have you dragging, possibly damaging your machine.
The Super ATV A-Arms, with 1.25 inch tubing are larger than your stock a-arms, and are designed to maintain your factory steering geometry, not causing any additional strain on your axles and tie rods. You will reuse your factory hardware and bushings and with full camber adjustability, you will be able to make adjustments to be sure your alignment is just where it needs to be. Making your dream of what your Pioneer 1000 could be one step closer, you will be on your way to it being unstoppable. Let Side by Side Stuff answer any questions you have about this product or any others, we are here to help!Features:
Optional Ball Joints:
- 2" additional clearance
- 1.5" forward offset
- 1.25" tube
- Full camber adjustability
Manufactured and designed by All Balls Racing, this perfect OEM replacement ball joint is sure to impress. Their steel housing ensures toughness and durability. Each is made to be self lubricated to keep the joint from seizing. The POM-M90 bearing cup is designed to isolate the steel rod from the housing to prevent damage. If you're looking for the perfect replacement for your worn out ball joints, grab a set for your upper and lower joints today!Optional Super ATV Bushing Kit:
When it comes to your UTV you've taken it on the most extreme trails and terrains, which means it's time to replace and repair a few key parts that keep your machine rolling forward. After you've purchased your a-arms you're going to need the perfect bushing set up, and that's why Side By Side Stuff offers you the Super ATV UHMW Bushings. Not only are these bushings built from durable UHMW, but they offer low wear characteristics and are self lubricating. With all these bushings have to offer you and more, they are a great addition to your a-arm upgrade! View Installation Instructions
This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov