Polaris RZR 570 Forward AArms

Applicability: 2008-14 Polaris RZR 800 and 2012-22 Polaris RZR 570 / RZR Trail 570


Getting the most clearance out of your Polaris RZR 800 or RZR 570 is important for tackling those rough trails and terrain. That's why we offer Super ATV's High Clearance Forward A-Arms for your Polaris RZR, which offers an additional 1.5 inches of clearance without adding a lift kit.

These high clearance forward a-arms have a lifetime warranty and now feature 1.25 inch tubes, 25% larger than the OEM tubing. The unique dual bend design of the forward control arms are crafted to maintain factory steering geometry so there's no added wear and tear on important components such as axles and tie rods. The forward a-arms have a forward offset of 1.5 inches, allowing you to run up to 29.5 inch tires without a lift.

These a-arms come with an all-inclusive kit containing extended tie rod ends. When moving your control arms forward, you need to adjust the toe on your steering rack and the only way to correctly utilize full thread engagement and maintain factory steering alignment is to use the extended tie rod ends. The steering stop kit is also added as well to prevent over-steering which would create unneeded bind on your axles.


Features:

• 1.5" additional clearance
• 1.25" tube - 25% larger than OEM
• 1.5" forward offset
• UV-resistant powder coat finish
• Full camber adjustability
• Easy to install
• Backed by a lifetime warranty
• Does not include ball joints

Optional All Balls Racing A-Arm Bushings:

Are your a-arm bushings becoming worn down and need to be replaced? All Balls Racing has come up with the perfect OEM replacement bushing for your machine. Each piece is designed to provide greater suspension travel and performance. Purchase yours today to replace just the front or both the front and rear and keep your machine in top notch!

• Designed to be an OEM replacement bushing
• Contains 52100 bearing steel that is hardened and precision ground
• Double lip seals type TC
• Contains thrust shims and cup seal
• Kit contains components to replace the front or both front and rear a-arm bushings

Optional Ball Joints:

Manufactured and designed by All Balls Racing, this perfect OEM replacement ball joint is sure to impress. Their steel housing ensures toughness and durability. Each is made to be self lubricated to keep the joint from seizing. The POM-M90 bearing cup is designed to isolate the steel rod from the housing to prevent damage. If you're looking for the perfect replacement for your worn out ball joints, grab a set for your upper and lower joints today!


 View Installation Instructions