Yamaha Wolverine X2 Warrior Snorkel Kit

****PLEASE READ: THERE ARE NO RETURNS OR REFUNDS ON THIS SNORKEL KIT. Risers come in ALL black only.****


Applicability: 2019-22 Yamaha Wolverine X2


At Side By Side Stuff we know that when you are out in your Yamaha Wolverine X2 you don't want any adventure to be off limits. With the Warrior Riser Snorkel Kit by Snorkel Your ATV, deep water and mud won't stop you; go ahead and dive in! Fully snorkeling your Wolverine, the aftermarket kit includes all vent lines and connectors required to get your intake up in the air, allowing you to power right through the deepest hole you can find. Snorkel Your ATV has taken care in their design to ensure the UTV kit does not interfere with cup holders or most windshields while allowing the use of your dump bed function.

The snorkel kit has two 2 inch risers that will snorkel your CVT inlet, CVT outlet, air intake and all the vent lines without having to drill into your airbox or block any important air vent tubes. By doing so, the sxs kit allows your machine to go deeper than you ever thought manageable before. The Warrior Riser Dual Snorkel Kit comes with detailed color instructions that will take you through the install. Check out all the great features for this kit and get your Wolverine ready for anything that lies ahead.


Features:

• 2 inch snorkel kit with all hard pipe
• Two (2) rear risers
• Dual 2 inch air intake performance kit for larger 850cc engine
• Won't interfere with cup holders or most windshields
• Fully snorkels machine , includes all vent lines and connectors required
• Warrior risers that slide and lock together for a strong, perfectly straight install
• Warrior risers have built in vent line slots to keep vent lines high, dry and secured cleanly
• Risers come in an all black finish but can easily be painted or hydro-dipped
• Allows for use of dump bed function, risers are connected with easy to remove rubber boots
• No tuning required
• Heavy duty rubber boots for easy disassembly
• Detailed color instructions with detailed pictures included for easy installation
• Comes standard with removable Warrior Wear tips
  • Not required for use
  • Easily cleaned and reusable, come unglued so you can custom paint them (come in black ONLY)
  • Easily glued with Locktite Stick'N Seal glue and can be glued with or without the water repellent pre-filter material
  • CVT outlet SHOULD NOT have the water repellent material in place

Optional LED Snorkel Accent Lights:

• Includes four 2 inch LED lights
• LED Snorkel lights are a key on system, meaning they come on when you turn the key on the machine

All snorkel kits may required some cutting / drilling, which is standard for snorkel kits.