Polaris RZR XP 1000 8 Inch Big Lift Kit

NOTES:
- There are currently no accurate photos of this lift kit in blue or red. The photos above are to show the general look and appearance of the machine after the lift has been installed.
- To determine what size of hardware you have, you figure out which socket is used to remove the center bolt holding the radius to the frame. For 10mm hardware, you will use a 15mm socket and for 12mm hardware, you will use a 18mm socket.
- Trailing arms are NOT included.


Applicability: 2019-21 Polaris RZR RZR XP Turbo and RZR XP 4 Turbo


There are several aspects to the offroad lifestyle: who's got the biggest and baddest machine is one of them. It's full of enthusiasts who spend their time one-upping everyone else in the roady crew. Are you that guy or gal that wants the best car in the gang? There's only one way to ensure you're rocking the raddest vehicle in the group, and that's with the Polaris RZR 8 Inch Big Lift Kit with RCV Axles made by the notorious High Lifter engineers.

High Lifter sets the bar "high" when it comes to their Big Lift Kit. Its intense build includes laser-cut brackets that relocate the shocks with a bolt-on application design. Why is this significant? Because that means you're not going to be cursing in frustration while you mount this puppy up. The UTV lift kit also comes with tons of other custom-made parts to ensure suspension performance is spot-on, like the springs, radius bars, and Outlaw RVC axles. This aftermarket SxS suspension kit is going to hook you up with a whopping 8-inches of ground clearance with two additional inches of forward sweep. Just imagine the aggressive tires you can slap on your XP Turbo. Who's ready to add some badassery to their Polaris? Get your purchase on.


Big Lift Features:

• Heavy duty laser cut rear upper lift/shock relocation brackets
• Increases ground clearance
• Makes room for larger tires
• Bolt-on application
• Kit includes:
  • (4) custom heavy-duty max clearance control arms crafted from 1 1/4"x.120 wall DOM tubing
  • Heavy duty support gussets
  • Shock mounts
  • Full set of custom heavy duty max clearance radius bars with spherical bearings
  • Front and rear heavy duty High Lifter springs
  • (4) custom Outlaw RCV axles
  • Additional brake line
  • Steering stops
  • All required hardware
  • Detailed instructions with step-by-step photos

RCV Axle Features:

• Built and assembled in the USA
• Uses the RCV Performance patented cage
• Sliding bars on both ends for increased angle capability
• Bars, housings, cages, and races made of high strength alloy steel
• Well established and proven design

 View Installation Instructions